Galaxy Metal Gear 65 manual Configuring the Http Settings, To set the Http settings

Galaxy 65 User Guide

H.2.6 Configuring the HTTP Settings

You can set up the passwords for SAM, the browser-based interface. In SAM, you can set up two types of SAM users:

•Monitor: Have access to only the Monitor menu that lets you view the status and statistics pages. If you have logged in using a monitor password and select a page from the Manage Galaxy 65 menu, SAM displays the Login page, where you can log in with the manage password. SAM then takes you to the page you requested. Three monitor users can be logged in at a time to each SM module.

•Manage: Have access to all SAM functions. Only one such user can be logged in at a time to each SM module.

Note SAM permits one manage user to log in to each SM module at the same time. If two users log in this way, their configuration changes could conflict.

To set the HTTP settings:

1From the System Menu, select Configuration Menu and press Enter. The Configuration Menu displays.

2Select LAN Configuration and press Enter. The LAN Configuration screen displays.

3Select HTTP Settings and press Enter. The HTTP Settings screen displays.

4Select the password you want to change and press Enter. The screen displays related to the password you selected.

5Enter the new password you want and press Enter

You can enter up to 15 characters for each password. You can only use letters, numbers, and underscores.

The system confirms that you want to make the change.

6Select Yes and press Enter. The system makes the change.

H.2.7 Configuring the Security Options

You can enable or disable the following LAN-related functions:

•Telnet: Controls access to the SM modules using Telnet, which permits you to manage the Galaxy 65s using your LAN. The default is enabled.

•FTP: Controls access to the SM modules using file transfer protocol (FTP), which permits you to upgrade the SM module’s LAN Subsystem firmware. The default is enabled.

218