Managing Arrays & Partitions
151
the existing setting for each partition. However, the Galaxy 65 Subsystem retains all existing include and
exclude lists.
If you use this option and later need to change back to your previous InfoShield settings, you must do so
by changing the setting for each partition individually. See C.3.8.3, ”Configuring InfoShield”, on page 148.
To change all partitions to include all hosts:
1From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2Select General InfoShield and press Enter.
The General InfoShield screen displays.
3Select Include All Hosts and press Enter.
The system confirms that the changes are made.
4Press Esc to return to the General InfoShield screen.
C.3.9 Deleting a Partition
You can delete a partition when you no longer need it and you want to use the space for another purpose.
Caution Deleting a partition deletes all data contained in the partition.
Note You cannot delete a partition while any utility (Initialize, Verify, Expand, or Reconstruct) is running on the
array. You must stop the utility, if allowed, or let it finish before you can delete the partition.
To delete a partition:
1Display the partition menu.
2Select Delete This Partition and press Enter.
The system asks you to confirm the deletion.
3Select Yes and press Enter.
The Delete Partition option is also available from the Array Menu.
From the Array Menu From the All Partitions Menu
1From the System Menu, select Array Menu and
press Enter.
The Select Array screen displays with a list of
existing arrays.
2Select the array you want and press Enter.
The array menu displays.
3Select Partition Menu and press Enter.
The Select Partition screen displays with a list of
existing partitions for the current array.
4Select the partition you want and press Enter.
The partition menu displays.
1From the System Menu, select All
Partitions Menu and press Enter.
The Select Partition or Free Area
screen displays with a list of existing
partitions and free space.
2Select the partition you want and
press Enter.
The partition menu displays.