Galaxy 65 Troubleshooting
87
7.21 Spare Parts and Ancillary ItemsThe following replaceable parts are available for the Galaxy 65 Subsystem:
You can upgrade your existing JBOD or RAID LRC module to a Rorke Data Galaxy 65 RAID LRC module
in accordance with the following procedure:
Caution Ensure that your Power Supply/Cooling modules are marked with P/N 44191-XX. If they are not you will
need to upgrade your PSUs. Please contact your supplier and request the upgrade modules.
1Change the Ops Panel switch settings to those shown in Table 7–9.
Important Switch settings are only read at Power On.
The Galaxy 65 enclosure ID must always be set to select ID1.
2Remove the existing LRC modules in accordance with the procedure in 7.12.3.1, ”Removing the Module”,
on page72 .
3Install the Storage Manager modules in accordance with the procedure in 7.12.3.2, ”Inserting the
Module”, on page73.
• Chassis (including Backplane) –RS232 cable
• AC Power Supply/Cooling Module –LAN cable
• Drive Carrier Module • 19 inch rack mounting rail kit
• Storage Manager Module • Dummy Carrier Module
• External FC-AL Signal Cables • Blank SM Module
• Cables • SFP module, optical
–LC - LC optical cable • SFP module, copper
–LC - SC optical cable • Battery, Li-ion
–SFP - SFP copper patch cable (1 M length) • (Country specific) power cords
–HSSDC2 - HSSDC1 • Bifurcated power cords
–HSSDC2 - DB9 • Keys for Drive Carrier modules.
–HSSDC2 - HSSDC2 • All documentation