Advanced
25
•How to Use Menu Functions
(picture, sound quality, etc.)
ŶMenu list
Menu Item Adjustments / Configurations (alternatives)
Setup
DVB Favourites Edit Creates list of favourite programmes (p. 29)
DVB Service List Skips the unwanted DVB programmes (p. 29)
Analogue Service List Skips the unwanted Analogue programmes or edits Analogue programmes (p. 29)
Tuning Menu
Auto Tuning
Automatically sets the programmes received in the area (p. 31)
DVB Manual Tuning Sets the DVB programmes manually (p. 31)
Analogue
Manual Tuning Sets the Analogue programmes manually (p. 31)
Add New DVB
Services Adds new DVB services (p. 31)
New Service
Message
Selects whether to give a notifi cation message when a new DVB service is found
(Off / On) (p. 31)
DVB Signal Display Checks the DVB signal condition (p. 31)
Off Timer Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Teletext Teletext display mode (TOP (FASTEXT) / List) (p. 18)
Shipping Condition Resets all settings, for example, when moving house (p. 32)
System Update Downloads new software to TV (p. 27)
Power Save Reduces brightness of picture to economise on power consumption (Off / On)
Side Panel Increases the brightness of the side panel (Off / Low / Mid / High)
•The recommended setting is “High” to prevent panel “image retention”
Picture Overscan
Selects the screen area displaying the image (Off / On)
On : Enlarged the image to hide the edge of the image.
Off : Displayed the image in the original size.
•Set to “On” if noise is generated on the edge of the screen.
•This function is available when aspect is set to “16:9”.
•This function can be memorized separately for “SD” (Standard defi nition) and HD
(High defi nition) signals.
Input Labels Labels or skips each input terminals (p. 33)
Banner Display
Timeout
Sets how long the information banner (p. 15) stays on screen
•0 (No display) to 10 sec. in 1-sec. increments
VIERA Link Settings
VIERA Link Sets to use VIERA Link functions (Off / On) (p. 38)
Power off Link Sets to use Power off Link function (No / Set) (p. 38)
Power on Link Sets to use Power on Link function (No / Set) (p. 38)
Region Select
Selects the region where you live to adjust the standard time (NSW/ACT / Victoria /
Queensland / South Australia / Western Australia / Northern Territory / Tasmania)
(p. 27)
Daylight Saving Time
Selects time offset from the standard time for Summer Time
(Auto / Off / +1/2 Hr / +1 Hr) (p. 27)
•Set to “Auto” normally
Refresh Rate
Changes the image processing of the panel (depending on the input signal)
(50Hz / 100Hz)
•Set to “100Hz” normally
Software Licence Displays the software licence information
System Information Displays the system information of this TV
•A different menu will be displayed while PC, DVI to HDMI adapter cable or SD Card is used. (p. 34-35 and p. 37)
•Only available items can be selected.