Filling a

l	Sil	k
Woo		k
		Nyl
		on

C otton

LinenMax

Min

D
lower	higher
steam	steam
2 dot	3 dot

1Make sure that the iron is not

plugged in and then set the variable steam control ‹ to the ‘0’ position before filling the iron with water.

2Open the fill cap and pour water through the filling hole › into the water tank ·, using the

beaker provided, one beaker full of water fills the tank (400ml). A After filling replace the fill cap. In hard water areas the use of distilled or demineralised water is recommended.

Never use battery topping up fluid or water containing any substances like starch, or sugar, or defrosted water from a refrigerator.

3Always pour out the remaining water after use. Warning: When filling your iron with tap water always use the beaker provided. Never fill directly under the tap.

Temperature control B

Plug in the iron and switch on. The ‘power on’ indicator lights

„situated in the back cover

will illuminate. Set the temperature control dial B to the temperature required, but don’t start ironing immediately. If you wait a few minutes, the iron will stabilise at the required setting. Your Morphy Richards

iron is fitted with an indicator light ‡ which will go on and off while you are ironing.

This is perfectly normal as it shows that the iron is maintaining the heat setting you have chosen.

It is always a good idea to begin with cool fabrics and work up to higher settings.

An iron heats up quicker than it cools down so you’ll save time and electricity.

FEATURES OF YOUR IRON

Temperature indicator light

The indicator light under the control knob shows that the iron is warming up. When the required temperature is reached the light will go out and will cycle on-off during operation.

Dry ironing

You can use your iron as a dry iron only. Make sure the variable steam control ‹ is set to the ‘0’ symbol.

Any temperature setting may be used depending on the garment. The spray feature may be used provided there is water in the tank (see filling section). You do not need to put any water in the tank when dry ironing only.

Spray C

Press the spray button ¤ and aim the spray of water at stubborn creases. You can do this whilst dry ironing providing there is water in the tank. When using the water spray it may be necessary to push the button a few times to get the spray pump primed.

Variable steam D

Fill the iron with water as described in ‘Filling’, page 4 and insert the plug into the electrical socket.

The steam output can be varied from low to high by sliding the variable steam control D. When using the iron at the bottom of the steam range, the steam output should be adjusted to the lowest setting.

The steam facility should only be used on garments which are suitable for ironing at 2 and 3 dot setting.

Turbo steam iron steam specifications

Morphy Richards Turbo Steam Iron is a revolution in garment care, designed to offer unparalleled performance and efficiency. Combining cutting-edge technology with user-friendly features, this steam iron is crafted to make ironing quicker and more effective, ensuring that your clothes look impeccable every time.

One of the standout features of the Turbo Steam Iron is its powerful steam output. With a continuous steam rate that ensures deep penetration into fabrics, the iron makes light work of even the most stubborn creases. The Turbo boost function releases an extra burst of steam, providing an efficient solution for thick fabrics or heavily wrinkled garments, allowing users to achieve professional-looking results in the comfort of their own homes.

The Turbo Steam Iron boasts a ceramic soleplate, which offers exceptional glide across different fabric types. This high-quality material reduces friction, allowing the iron to smoothly glide over garments without snagging or sticking. The soleplate is also durable and resistant to scratches, ensuring longevity and consistent performance over time.

In terms of safety and convenience, the Morphy Richards Turbo Steam Iron is equipped with an automatic shut-off feature, which activates when the iron is left unattended for a certain period. This not only provides peace of mind but also reduces the risk of accidents. The lightweight design of the iron makes it easy to maneuver, reducing fatigue during extended ironing sessions.

The water tank capacity is another highlight, allowing for longer use without the need for frequent refills. This is particularly advantageous for larger ironing loads, enabling users to move through their chores efficiently. Additionally, the iron features an anti-drip system that prevents water from leaking onto clothes, keeping fabrics stain-free.

With its sleek design and modern aesthetics, the Morphy Richards Turbo Steam Iron is visually appealing while being functional. The intuitive controls are easy to navigate, making it suitable for both novice and experienced users alike.

In conclusion, the Morphy Richards Turbo Steam Iron is built with advanced technology and practical features that elevate the ironing experience. It provides powerful steam performance, efficient glide, and safety measures, making it a stellar choice for anyone looking to keep their wardrobe crisp and well-presented. Whether tackling everyday clothing or delicate fabrics, the Turbo Steam Iron is a reliable companion in the quest for wrinkle-free garments.

Morphy Richards Turbo steam iron steam manual Filling a, Features of Your Iron

Models: Turbo steam iron steam

FILLING A