Force10 Networks 100-00055-01 manual System Specifications, Physical Connections, PB-10GE-2P

Label	Description
(Power Button)	This button turns the appliance on and off. Press and hold the button to turn off the
	appliance.
(Laser Warning)	This label in the bottom right corner of the appliance indicates that the appliance is a
	Class 1 laser product that emits invisible laser radiation. This product complies with
	CDRH, 21 CFR 1040.
	FN00048A

System Specifications

The specifications in Table 1 apply to the P-Series P10 appliance, Force10 catalog number

PB-10GE-2P.

Table 1 System Specifications

Power	AC Power Supply	Power Consumption: 400W maximum, 260W nominal
		Current: 3.6 A @ 120V, 2.0 A @ 240V
		Voltage: 100-240V, 47-63Hz, 8A maximum input current
		Heat Dissipation: 1360 BTU/hr maximum, 888 BTU/hr nominal
	Battery	3V CR2032 coin cell
Physical	Dimensions	Height: 1.75 in
		Width: 17.6 in
		Depth: 15.5 in (1RU half depth)
	Weight	20 lbs (9.07 kg)
Environmental	Temperature	Operating: 41° to 104°F (5° to 40°C)
		Storage: -40° to 149°F (-40° to 65°C)
		Relative humidity: 20-80% (non-condensing)
	Altitude	Operating:-50 to 10,000 ft (-16 to 3048 m)
		Storage: -50 to 35,000 ft (-16 to 10,600 m)

Physical Connections

Note: Connections to the sensing, mirroring, and management ports require straight-through CAT5 cables.

Warning: Do not hot-swap XFPs. If they are accidentally removed, turn off the appliance, replace the XFPs, and then turn the appliance back on.

10 Installation