UNIVERSAL WIRE REEL STAND (K1524-1)
Includes a 2" (51mm) O.D. Spindle with adjustable brake and two locations for mounting the spindle to allow for the mounting of 50 - 60lb, 10 - 30 lb, 13 - 14lb, and 8" O.D. coils with proper spindle adapters. (See OPERATION section) Capable of being mount- ed on the top of a suitable power source or surface without the need for any other mounting kit. Optional features available for this stand include:
•K1555-1 insulated lift bale
•K1556-1 caster kit
•K1557-1 swivel platform.
60 LB. (27.2 KG) COIL ADAPTER (K1504-1)
Permits 50-60 lb. (22.7-27.2 Kg) coils to be mounted to a 2" (51mm) spindle.
K1551-1 INSULATED LIFT BALE: Provides a bolt on lift bale with an electrically insulated lift hook.
K1556-1 CASTER KIT: Comes with 4 light duty 2" O.D. casters which mount in place of the rubber feet on the wire stand. Use in light duty applications where portability is required. Can be used in combi- nation with the K1557-1 swivel platform.
K1557-1 SWIVEL PLATFORM: Allows for the mounting of the wire feeder reel stand assembly on top of a suitable power source if the need for the wire feeder reel stand assembly to swivel is desired. Also has mounting holes in the base feet for mounting to any surface that it can be fastened to. Comes with a rotating tool tray to hold gun tips, guide tubes, drive rolls, etc. Will work in combination with the K1556-1 caster kit.
WIRE REEL ASSEMBLY:
K303 - 50-60 lb. (22.7-27.2 kg) Wire reel mounting stand. Assembly includes a framework to which is attached the 50-60 lb. (22.7-27.2 kg) wire reel, a mounting spindle, a dust shield, a lift bail, and a cable clamp for fastening the input cable assembly. The reel mounting spindle is the pull knob type with a built- in brake. The brake pad is adjustable for proper brak- ing at low or high wire feed speeds. In extremely dusty and dirty locations a wire reel dust shield door kit can be added to this unit.
This door kit, which includes a hinged door and sliding bottom seal, makes the housing completely enclosed. Order part number M11514.
K376 - Same as K303 above but without dust shield. A dust shield that covers the wire reel and protects the wire from falling dirt and dust is available for this unit. Order part number S14543. This unit will also accept the M11514 door kit (see K303 above) but only if already equipped with optional dust shield (S14543).
K377 - Small mounting stand for Readi-Reel coils or 10-30 lb. (4.5-14 kg) spools with 2" (51 mm) I.D. This assembly includes a small frame to which is attached a 2" (51 mm) O.D. wire reel spindle and a K363P Readi Reel adapter for using the Lincoln "Readi-Reel Electrode Coils". Without the adapter, the unit is capable of handling spools with a 2" (51 mm) I.D., a 12" (305 mm) maximum O.D., and a 4" (101 mm) width.
K378 - Small mounting stand for 13-14 lb. (6 kg) Innershield coils. This assembly includes the same smaller frame as used in the K377 and a fully enclosed canister system for de-reeling of the 14 lb. (6 kg) coil. This system has a fixed brake for this coil.
K445 - 50-60 lb. (22.7-27.2 kg) Readi-Reel mounting stand. This assembly includes framework to which is attached a 2" (51 mm) O.D. spindle with adjustable brake and 50-60 lb. (22.7-27.2 kg) (K438) Readi-Reel adapter. Includes a lift bail and cable clamp for fas- tening the input cable assembly. Does not include a dust shield. A dust shield that covers the wire reel and protects the wire from falling dirt and dust is avail- able for this unit. Order part number S14543. This unit will also accept the M11514 door kit (see K303 above) but only if already equipped with optional dust shield (S14543).
