Lincoln Electric IM557 manual Installation

A-11 INSTALLATION A-11

Wire Reel Dust Shield for K376 50-60 Lb. Wire Reel Mounting Stand - If the user desires to protect the wire from falling dirt and dust, there is a shield avail- able to cover the wire reel. Order part number S14543. Instructions are included with the kit.

Wire Reel Dust Shield Door for K303 and K376 (when equipped with an S14543 shield) - In extremely dusty and dirty locations, this door kit can be added to those units having the shield kit (S14543). This door kit includes a hinged door and sliding bottom seal. When these parts are attached to the reel support per the instructions included, the unit becomes a completely enclosed housing. Order part number M11514.

K377 - Small Mounting Stand for Readi-Reel Coils or 10-44 Pound (4.5-20 kg) Spools with 2" I.D. - This assembly includes a small frame to which is attached a wire reel spindle similar to the K162 Spindle. The unit is supplied with the K363 Readi-Reel Adapter for using the Lincoln "Readi-Reel Electrode Coils". Without the adapter, the unit is capable of handling spools with a 2" (51mm) I.D., a 12" (30mm) maximum O.D., and a 4" (101mm) width. For spools with an 8" (200mm) O.D., a K468 spindle adapter is available. The spindle has an adjustable braking system. See Installation section “Attaching the Wire Reel Stand” for mounting to wire feed unit.

K378 - Small Mounting Stand for 13-14 Pound Innershield Coils - This assembly includes the same smaller frame as used in the K377 and a fully enclosed canister system for de reeling of the 14 pound (6 kg) coil. This system has a fixed brake for this coil. See Installation section “Attaching the Wire Reel Stand” for mounting to wire feed unit.

K659-1- Gas Guard Regulator - Adjustable flow regu- lator with removable adjustor key for CO2 and Argon blend gases. Mounts onto feeder inlet, and reduces gas waste and arc start "blow" by reducing surge caused by excess pressure in supply hose.

Install the 5/8-18 male outlet of the regulator to the 5/8-18 female gas inlet on the back panel of the Synergic 7. Secure fitting with flow adjuster key at top. Attach gas supply to 5/8-18 female inlet of regu- lator per See Installation section “Shielding Gas Connections”.

K1524-1 Universal Wire Reel Stand - The assembly includes a reel stand, a 2" (51 mm) O.D. spindle with adjustable brake, rubber mounting feet, and a cable clamp for fastening the input cable. It is easily mount- ed to the wire feed unit by three bolts. The wire feed- er reel stand assembly fits on top of the power source and is correctly positioned by using a hole in the base that accommodates the power source lift bale. The 2" (51mm) O.D. spindle can be set on one of two mount- ing locations on the stand, depending on what coil of wire and spindle adapter is being used. The upper hole mounts 50-60 lb coils, the lower hole mounts 10- 30 lb, 13-14 lb, and 8" O.D. coils. Installation instruc- tions are included with the kit.

K1555-1 Insulated Lift Bale Kit for K1524-1 - A lift bale can be added to the K1524-1 Universal Wire Reel Stand. The K1555-1 provides electrical insula- tion between the wire stand assembly and the lift hook. It is easily mounted to the wire stand with three bolts and a threaded plate. Installation instructions are included with the kit.

K1556-1 Caster Kit for K1524-1 - A light duty caster kit can be added to the K1524-1 Universal Wire Reel Stand. The K1556-1 includes 4 2" O.D. light duty casters that mount in place of the rubber feet on the wire stand base. Installation instructions are included with the kit.

K1557-1 Swivel Platform for K1524-1 - A swivel plat- form can be added to the K1524-1 Universal Wire Reel Stand. The K1557-1 includes a pivot top plate and a base assembly. The pivot top plate mounts to the underside of the base of the wire stand assembly using four screws. The swivel base mounts to the power source lift bale with hardware provided or it can be mounted to a surface of choice with four customer provided bolts. Installation instructions are provided with the kit.

SYNERGIC 7 & 7H