K566 * - GMAW process Magnum 250XA X-TRAC- TOR gun and cable assemblies are rated 250 amps, 60% duty cycle. (Consult sales specifications for appropriate models).
*K179 type vacuum unit not recommended for use with Synergic 7.
MISC. OPTIONS:
K590-4 (Water Connection Kit) - Includes water sup- ply quick-connectors already attached to mounting insulators and internal connection hoses for easy installation on the front and rear panels of the Synergic 7 case. Also includes water cooled gun tube fittings and self-sealing outlet and inlet quick-connec- tors for mounting to the front of the Synergic 7 case.
K659-1(Gas Guard Regulator) - Adjustable flow regu- lator with removable adjustor key for CO2 and Argon blend gases. Mounts onto wire drive gas inlet, and reduces gas waste and arc start "blow" by reducing surge caused by excess pressure in supply hose.
K1449-1(Dual Procedure Remote Control) - Includes a remote control box with a 16ft. (5m) length control cable with 4-pin plug for the mating receptacle on the bottom of the Synergic 7 control box. The remote control box contains 2 rotating knob encoders, one controls arc voltage and the other controls weld wire feed speed, and a procedure selector switch which function the same as comparable controls on the front panel, which are disabled when the remote is con- nected.
K683-1(Dual Procedure Switch) - Kit includes gun switch, and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5 m) control cable and 3- pin plug.
K163 Undercarriage - For all Synergic 7 wire reel stand combinations. Includes mounting frame, front casters, 10" (254 mm) O.D. rear wheels, and handle. Use when portability is required.
K178-1Swivel Platform - For all Synergic 7 wire reel stand combinations. For mounting wire feeder wire reel stand assembly on top of suitable Lincoln Idealarc power sources. Recommended input cable length is 7 ft. (2 m) when using the K178-1 on the Invertec power sources.
