Minolta F100 instruction manual Disconnecting the camera from the computer, Windows 98 and 98SE

DATA-TRANSFER MODE

Disconnecting the camera from the computer

Never disconnect the camera when the access lamp is red – the data or

memory card may permanently be damaged.

Windows 98 and 98SE

Confirm that the access lamp is not red. Turn the camera off and then disconnect the USB cable.

Windows ME, 2000 professional, and XP

To disconnect the camera, left click on the unplug-or-eject-hardware icon located on the task bar. A small window will open indicating the device to be stopped.

Click on the small window to stop the device. The safe-to- remove-hardware window will appear. Click “OK.” Turn the camera off and then disconnect the USB cable.

When more than one external device is connected to the computer, repeat the procedure above except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware window after clicking on the small window indicating the device.

114