GETTING UP AND RUNNING
GETTING UP AND RUNNING
Changing the CR-V3 battery
This digital camera uses one CR-V3 lithium battery. When replacing the batteries, the mode dial should be in the off position.
Open the battery-chamber door by sliding the door toward the bottom of the cam- 2
era (1) to release the safety catch; the door can then be opened(2).
1
4
Insert the battery.
•The CR-V3 battery must be inserted with the battery terminals first. The flat side of the battery should face the front of the camera. If the battery does not fit, check its orientation. Never force the battery.
Close the battery-chamber door (3) and slide it toward the top of the body (4) to engage the safety catch.
• After installing the battery, the set-time/date message may
| 3 | appear on the monitor. The clock and calendar are set in the |
| custom 2 section of the setup menu (p. 96). |
| |
