Minolta F100 instruction manual Changing the memory card

GETTING UP AND RUNNING

Changing the memory card

An SD Memory Card or MultiMediaCard must be inserted for the camera to operate. If a card has not been inserted, a no-card warning will automatically be displayed on the monitor and three dashes (–

––) will be displayed on the data-panel frame counter. For memory card care and storage, see page 122.

Always turn off the camera and confirm the power/access lamp is not red before inserting or removing a memory card; the card may be damaged, and data lost.

1 2 3

Open the card-slot door (1) from the fingernail notch at the bottom of the camera.

4

Insert the memory card all the way into the card slot and release (2). The card should catch in the slot.

•Insert the card so the face is toward the front of the camera. Always push the card in straight. Never force the card. If the card does not fit, check that it is orientated correctly.

To eject a memory card, press the card into the slot and release (3). The card can now be pulled out.

• Take care when removing the card as it becomes hot with use.

Close the card-slot door (4). The door should click into place.

18