Connecting to Your PC
Disconnecting from Your PC
Click the | on the task bar located |
|
|
1at the |
|
| |
screen. Click [Safely Remove |
|
| |
Hardware]. |
|
|
|
| 1 | ||
The drive letter will differ depending on the | |||
PC being used. |
|
2
3Make sure that the display is turned off, disconnect the USB.
4Connect the battery compartment to the main unit.
Leave the HOLD switch in its disabled position (☞ P. 75) when connecting the battery compartment.
..................................................................................................................................................
Notes
•NEVER disconnect the USB while the record/play indicator light and USB access indicator light are flashing in red. If you do so, the data may be destroyed.
•Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.
•Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.
•Use the supplied USB extension cable depending on situations.
•Do not use USB extension cables other than the supplied cable. Using cables from other manufacturers could result in damage to the recorder. Do not use the supplied USB extension cable with devices from other manufacturers.
3
Connecting to
Your PC
47