RCA M50WH186 manual Pb Pr Component Video Connection, Connecting the Device

Connections & Setup

Y Pb Pr (Component Video) Connection

INPUT 2	INPUT 3		INPUT 4		SVGA INPUT	WIRED
COMPONENT/COMPOSITE			COMPOSITE	AUDIO	VGA/SVGA/XGA	REMOTE			ANTENNA
						CONTROL
Y/VIDEO		L	VIDEO	FIXED/VARIABLE			(IR)		INPUT
PB		R	L	AUDIO OUTPUT		DIGITAL
				L					CABLE
						AUDIO
				HDMI 1 INPUT HDMI 2 INPUT		OUTPUT For Factory			INPUT
			R	R				use only
		S-VIDEO

INPUT 1

COMPONENT/COMPOSITE

Y/VIDEO	L
PB	R
PR

INPUT

VIDEO	L	AUDIO	R	S-VIDEO	COMPONENT VIDEO			AUDIO
				IN	Y	Pb	Pr	L	R
					VIDEO	L	AUDIO R	S-VIDEO
								OUT

Note: This back panel graphic is for representation only. Your back panel might be different.

•If you are done connecting devices to your TV, go to page 13 to complete the Assisted Setup.

•To continue connecting devices, go to the next page.

Green

Blue

Red

Component Video cables (Y Pb Pr) are color coded- Green, Blue and Red

Red

White

Audio cables are color coded- Red= right audio; white= left audio

Connecting the Device

This connection allows you to connect a device that has Y Pb Pr jacks, for example, a DVD player. If the device you are connecting also has S-Video or composite video, we recommend you use the component video input for better quality.

Using the example of a DVD player:

1.If necessary, connect your cable and/or off-air antenna as described on page 6.

2.Connect your Y Pb Pr component video cables.

Connect three video cables or component video cables to the INPUT 1 Y/VIDEO PB PR jacks on the back of the TV and to the Y PB PR outputs on the DVD player.

3.Connect your audio cables.

Connect the audio (white and red) cables to the INPUT 1 R and L Audio jacks on the back of the TV and to the Audio Output jacks on the DVD player.

Viewing the Picture from the Connected Device

The device in this connection is connected to the TV’s INPUT 1 jacks. To view this device:

1.Turn on the TV and the device you want to view, for example a DVD player.

2.Press the TV button on the remote control to put the remote in TV mode.

3.Press the INPUT button on the remote control to scroll through the Video Input Channels until you see Input 1 (Component) displayed in the channel banner.

Note: You can set up the TV to automatically tune to the correct device you want to view. This is called Auto Tuning. See Chapter 3 for more information on Auto Tuning.

Chapter 1