Sony MHC-GNX90, MHC-GNX100, MHC-GNX60, MHC-GNX66, MHC-GNX70, MHC-GNX77, MHC-GNX80, MHC-GNX88, MHC-GX9900 Set up the AM loop antenna, then connect it.

masterpage:Left

\

Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB05CON-

model name[MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]

[2-547-453-11(2)] GB

10GB

5Connect the FM and AM an tennas.

Set up the AM loop antenna, then connect

it.

6For models equipped with a voltage

selector, set VOLTAGE SELECTOR to

the position of your local power line

voltage.

Brazil model only

Other models

7Connect the power cord to a wall

outlet.

The demonstration appears in the display.

When you press ?/1, the system turns on

and the demonstration automatically ends.

If the supplied adaptor on the plug does not

fit your wall outlet, detach it from the plug

(only for models equipped with an adap tor).

Notes

• Keep the speaker cords away from the antennas to

prevent noise.

• (Except for MHC-GNX90/GNX66/GNX60)

Be sure to connect both l eft and right surround

speakers.

• Be sure to match the color of the speaker terminals on

the unit and the connectors.

• Be sure to connect the speakers securely and

correctly. When conne cting speak er cords, i nsert the

connectors straight into the terminals.

To connect optional components

See “Hooking up optional components” on page 40.

AM

Extend the FM lead

antenna horizontally

AM loop antenna

VOLTAGE SELECTOR

220V 127V

220V

VOLTAGE SELECTOR

220V 120V

230-240V

Contents

Main Mini Hi-Fi Component System Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB02REG- [2-547-453-11(2)] GB To prevent fire or shock hazard, do not expose the unit to rain or moisture. WARNING Getting Started Disc Playback Tuner Tape Playback Table of Contents Display Optional Components Troubleshooting Additional Information About this manual List of playable discs Discs that this system cannot play back Playable discs Notes on discs Note on DualDiscs Music discs encoded with copyright protection technologies Cautions when playing a disc that is recorded in Multi Session Hooking up the system Getting Started When using a TV Set up the AM loop antenna, then connect it. Page Positioning the speakers Getting Started Use buttons on the remote for the operation. 1 2 Setting the clock CLOCK appears in the display. Then, the hour indication flashes in the display. 3 The minute indication flashes in the display. 1 The disc tray slides out. 2 To load additional discs, press EX-CHANGE/DISC SKIP to rotate the disc tray. 3 1 2 3 Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB06CDP- Disc Playback To cancel Repeat Play 2 3 Playing repeatedly Repeat Play Creating your own program 4 5 6 7 Automatic tuning preset 1 2 3 4 5 1 2 3 Tuner Presetting radio stations 4 5 7 To improve tuner reception 1 2 3 1 2 3 Listening to a non-preset radio station Manual Tuning 1 2 3 Listening to the radio 1 2 3 You can use TYPE I (normal) tape. 1 2 3 Tape Playback Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB08TAP- 1 2 3 4 5 To stop recording 1 2 3 4 REC flashes in the display. Deck B standby for recording. 5 Adjusting the sound Selecting the preset effect 1 2 3 5 Adjusting the graphic equalizer or selecting the surround effect Selecting the MP3 Booster effect Selecting the sound system 1 2 To turn off the subwoofer To cancel the flashing effect To change the sound flash speed Creating a party environment (MHC-GNX100 only) 1 2 Selecting the speaker system Multiplex Effect Selecting audio channel 1 2 3 4 Singing along 1 2 3 5 6 7 Each time you press the button, the display changes as follows: 8 9 1 2 3 4 5 Turning off the display Power Saving Mode Display 1 DIMMER 2* DIMMER 1 DIMMER OFF SPECTRUM 4 1 The last selected spectrum setting appears in the display. 2 X-POS ON* y X-POS OFF 1 The last selected dimmer setting appears in the display. 2 Changing the spectrum analyzer display SPECTRUM 1 Changing the power illuminator Viewing information about the disc in the display Display Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB09TIM-E3.fm] Checking the total playing time and titles Press DISPLAY repeatedly when playback is stopped. Each time you press the button, the display changes cyclically as follows: x When the play mode is other than PROGRAM x When the play mode is PROGRAM Hooking up optional components Optional Components Listening to a connected VCR, MD deck or DVD player 1 See Hooking up optional components on 2 Start playing the connected component. To switch between the VIDEO and MD function 1 See Hooking up optional components on 2 Making a digital recording from a disc onto a connected MD deck 1 See Hooking up optional components on 2 Refer to the operating instructions provided with the connected component. Listening to audio from a connected component Connecting external antennas 1 2 General Troubleshooting Problems and remedies When the ?/1 indicator flashes Speakers Disc player [2-547-453-11(2)] GB Tape deck continued Messages Use buttons on the unit for the operation. 1 2 3 4 One of the following messages may appear or flash in the display during operation. Disc Others On operating voltage On safety On placement On heat build-up Precautions On operation Notes on discs Additional Information Specifications MHC-GNX88 (HCD-GNX88)/MHC-GNX80 (HCD-GNX80) MHC-GNX88 (SS-WGV88)/GNX80 (SS-WG80) MHC-GNX77/GNX70 MHC-GNX66/GNX60 Disc player section Tape deck section continued Tuner section Page [2-547-453-11(2)] GB General masterpage:Left-3 (3 column) [2-547-453-11(2)] GB Main unit List of button locations and reference pages How to use page 54 to 56 DISPLAY rd (36, 38, 39) Page masterpage:Left-3 (3 column) Sony Corporation Subwoofer (MHC-GNX100/GNX88/GNX80 only) Remote control