Sony MHC-GNX90, MHC-GNX100, MHC-GNX60, MHC-GNX66, MHC-GNX70, MHC-GNX77, MHC-GNX80, MHC-GNX88, MHC-GX9900 1, 2, Using the subwoofer Flashing sound effect

Sound Adjustment

masterpage:Right

\

Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB08TAP-

model name[MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]

[2-547-453-11(2)] GB

29GB

(MHC-GNX100/GNX88/GNX80 only)

You can use the sound of the subwoofer to

enhance the bass.

1Press SUBWOOFER ON/OFF on the

subwoofer repeatedly until the

indicator lights up.

The subwoofer is turned on.

2Turn SUBWOOFER LEVEL to adjust

the level.

You will be able to listen to low bass

frequency sound.

To turn off the subwoofer

Press SUBWOOFER ON/OFF on the

subwoofer again.

Notes

• If you turn MASTER VOLUME (or press VOLUME

+/– on the remote), the volume for all speakers will

change.

• (MHC-GNX100 only)

When you se lect “ S PEA KER S B” , the s ub woo fe r is

turned off automatically.

Tip

You can turn MASTER VOLUME (o r pre ss

VOLUME +/– on the remote) to adjust the volume of

the subwoofer linked to the front speakers.

With the sound flash function, you can flash the

sound output. The sound cuts off periodically.

Hold down SOUND FLASH during

playback.

The flashing effect is activated.

To cancel the flashing effect

Release SOUND FLASH.

To change the sound flash speed

Hold down SOUND FLASH and turn

OPERATION DIAL clockwise or

counterclockwise to change the sound flash

speed (1 ~ 20).

Tips

• (MHC-GNX100 only)

You can activate the X-ROUND and SOUND

FLASH effect simultaneously.

• The power illuminator will synchroni ze with the

selected SOUND FLASH effect.

Using the subwoofer Flashing sound effect

— SOUND FLASH

Contents

Main Mini Hi-Fi Component System Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB02REG- [2-547-453-11(2)] GB To prevent fire or shock hazard, do not expose the unit to rain or moisture. WARNING Getting Started Disc Playback Tuner Tape Playback Table of Contents Display Optional Components Troubleshooting Additional Information About this manual List of playable discs Discs that this system cannot play back Playable discs Notes on discs Note on DualDiscs Music discs encoded with copyright protection technologies Cautions when playing a disc that is recorded in Multi Session Hooking up the system Getting Started When using a TV Set up the AM loop antenna, then connect it. Page Positioning the speakers Getting Started Use buttons on the remote for the operation. 1 2 Setting the clock CLOCK appears in the display. Then, the hour indication flashes in the display. 3 The minute indication flashes in the display. 1 The disc tray slides out. 2 To load additional discs, press EX-CHANGE/DISC SKIP to rotate the disc tray. 3 1 2 3 Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB06CDP- Disc Playback To cancel Repeat Play 2 3 Playing repeatedly Repeat Play Creating your own program 4 5 6 7 Automatic tuning preset 1 2 3 4 5 1 2 3 Tuner Presetting radio stations 4 5 7 To improve tuner reception 1 2 3 1 2 3 Listening to a non-preset radio station Manual Tuning 1 2 3 Listening to the radio 1 2 3 You can use TYPE I (normal) tape. 1 2 3 Tape Playback Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB08TAP- 1 2 3 4 5 To stop recording 1 2 3 4 REC flashes in the display. Deck B standby for recording. 5 Adjusting the sound Selecting the preset effect 1 2 3 5 Adjusting the graphic equalizer or selecting the surround effect Selecting the MP3 Booster effect Selecting the sound system 1 2 To turn off the subwoofer To cancel the flashing effect To change the sound flash speed Creating a party environment (MHC-GNX100 only) 1 2 Selecting the speaker system Multiplex Effect Selecting audio channel 1 2 3 4 Singing along 1 2 3 5 6 7 Each time you press the button, the display changes as follows: 8 9 1 2 3 4 5 Turning off the display Power Saving Mode Display 1 DIMMER 2* DIMMER 1 DIMMER OFF SPECTRUM 4 1 The last selected spectrum setting appears in the display. 2 X-POS ON* y X-POS OFF 1 The last selected dimmer setting appears in the display. 2 Changing the spectrum analyzer display SPECTRUM 1 Changing the power illuminator Viewing information about the disc in the display Display Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB09TIM-E3.fm] Checking the total playing time and titles Press DISPLAY repeatedly when playback is stopped. Each time you press the button, the display changes cyclically as follows: x When the play mode is other than PROGRAM x When the play mode is PROGRAM Hooking up optional components Optional Components Listening to a connected VCR, MD deck or DVD player 1 See Hooking up optional components on 2 Start playing the connected component. To switch between the VIDEO and MD function 1 See Hooking up optional components on 2 Making a digital recording from a disc onto a connected MD deck 1 See Hooking up optional components on 2 Refer to the operating instructions provided with the connected component. Listening to audio from a connected component Connecting external antennas 1 2 General Troubleshooting Problems and remedies When the ?/1 indicator flashes Speakers Disc player [2-547-453-11(2)] GB Tape deck continued Messages Use buttons on the unit for the operation. 1 2 3 4 One of the following messages may appear or flash in the display during operation. Disc Others On operating voltage On safety On placement On heat build-up Precautions On operation Notes on discs Additional Information Specifications MHC-GNX88 (HCD-GNX88)/MHC-GNX80 (HCD-GNX80) MHC-GNX88 (SS-WGV88)/GNX80 (SS-WG80) MHC-GNX77/GNX70 MHC-GNX66/GNX60 Disc player section Tape deck section continued Tuner section Page [2-547-453-11(2)] GB General masterpage:Left-3 (3 column) [2-547-453-11(2)] GB Main unit List of button locations and reference pages How to use page 54 to 56 DISPLAY rd (36, 38, 39) Page masterpage:Left-3 (3 column) Sony Corporation Subwoofer (MHC-GNX100/GNX88/GNX80 only) Remote control