Additional Information
masterpage:Right
\
Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB12INF-E3.fm]
model name [MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]
[2-547-453-11(2)] GB
49GB
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with mild detergent solution. Do not
use any typ e of abrasive pad, scouring powde r or
solvent such as thinner, benzene or alcohol.
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the tape tab from side A or B as
illustrated.
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Before placing a tape in the tape deck
Take up any slack in the tape deck. Otherwise, the tape
may get entangled in the parts of th e tape deck and
become damaged.
When using a tape longer than
90 minutes
The tape is very elastic. Do not change the tape
operation s such as playback, st op and fast-winding etc.
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be
sure to clea n the tape heads before you start an
important re cording or afte r playin g an old t ape. Us e a
separately sold dry-type or wet-type cleaning tape. For
details, refer to the instructions of the cleaning ta pe.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetizing tape. For
details, refer to the instructions of the demagnetizing
tape.
AUDIO POWER SPECIFICATION
(MHC-GX9900 USA model only)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm lo ads, both channels driven, from
120 Hz – 10 kHz; rates 230 watts per channel
minimum RMS power, with no more than 10% total
harmonic dist o rt i on fr om 250 miliwatts to ra te d
output.
Amplifier section
MHC-GX9900
Total harmon i c di st or t io n Less than 0.1%
(6 ohms at 1 kHz, 100 W)
MHC-GNX100 (HCD-GNX100)
The follow i ng are measured at
Mexican model: AC 127 V, 60 Hz
Brazil model: AC 127 V or 220 V, 60 Hz
Other models: AC 120, 220, 240 V,
50/60 Hz
DIN power output (rated) 130 × 2 + 130 × 2 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
175 × 2 + 175 × 2 watts
(6 ohms at 1 kHz,
10% THD)
MHC-GNX100 (SS-WG100)
The follow i ng are measured at
Mexican model: AC 127 V, 60 Hz
Brazil model: AC 127 V or 220 V, 60 Hz
Other models: AC 120, 220, 240 V,
50/60 Hz
Continuous RMS power output (reference)
210 watts
(8 ohms at 100 Hz,
10% THD)
MHC-GNX90
The follow i ng are measured at
Brazil model: AC 127 V or 220 V, 60 Hz
DIN power output (rated) 210 + 210 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
275 + 275 watts
(4 ohms at 1 kHz,
10% THD)
Break off the
tape tab

Specifications

continued