Sony MHC-GNX90, MHC-GNX100, MHC-GNX60, MHC-GNX66, MHC-GNX70, MHC-GNX77, MHC-GNX80, MHC-GNX88, MHC-GX9900 1, 2, 3, 5, Adjusting the graphic equalizer or selecting the surround effect

Sound Adjustment

masterpage:Right

\

Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB08TAP-

model name[MHC-GNX100/GNX90/GNX80/GNX88/GNX70/GNX77/GX9900/GNX60/GNX66]

[2-547-453-11(2)] GB

27GB

You can adjust the sound by raising or lowerin g

the level of specific frequency band, then store

up to three user equalizer setting in the memory.

1Press EQ BAND repeatedly to select a

frequency band or surround effect.

2Turn OPERATION DIAL clockwise or

counterclockwise to adjust the level or

select surround effect you want.

3Repeat step 1 and 2 to adjust the level

of other frequency bands.

4Press ENTER.

A user equalizer number flashes in the

display.

5Turn OPERATION DIAL clockwise or

counterclockwise to select a user

equalizer number (1~3) you want to

store the equalizer setting.

6Press ENTER.

This setting is automatical ly stored as the

user equalizer setting you selected in step 5.

The previous setting stored at this memory

location is erased and replaced by the new

setting.

Tip

If you do no t wa nt to s tore the e qualiz er se tting , sele ct

“EXIT?” in step 5.

Other operations

MHC-GNX100/GNX66/GNX60 only

Press SURROUND repeatedly.

Each time you press the button, the display

changes cyclically as follows:

SURROUND ON t SURROUND OFF

Notes

• When you select certain preset effects, the surround

effect may be canceled.

• When the surr ound effect is sele ct ed,

“SURROUND” lights up in the display.

Adjusting the graphic

equalizer or selecting the

surround effect

Frequency level

Frequency band

To Do this

Call up a u s er

equalizer setting Turn OPERATION DIAL

clockwise or counterclockwise

until the user equalizer setting

number you want appears in the

display.

Contents

Main Mini Hi-Fi Component System Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB02REG- [2-547-453-11(2)] GB To prevent fire or shock hazard, do not expose the unit to rain or moisture. WARNING Getting Started Disc Playback Tuner Tape Playback Table of Contents Display Optional Components Troubleshooting Additional Information About this manual List of playable discs Discs that this system cannot play back Playable discs Notes on discs Note on DualDiscs Music discs encoded with copyright protection technologies Cautions when playing a disc that is recorded in Multi Session Hooking up the system Getting Started When using a TV Set up the AM loop antenna, then connect it. Page Positioning the speakers Getting Started Use buttons on the remote for the operation. 1 2 Setting the clock CLOCK appears in the display. Then, the hour indication flashes in the display. 3 The minute indication flashes in the display. 1 The disc tray slides out. 2 To load additional discs, press EX-CHANGE/DISC SKIP to rotate the disc tray. 3 1 2 3 Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB06CDP- Disc Playback To cancel Repeat Play 2 3 Playing repeatedly Repeat Play Creating your own program 4 5 6 7 Automatic tuning preset 1 2 3 4 5 1 2 3 Tuner Presetting radio stations 4 5 7 To improve tuner reception 1 2 3 1 2 3 Listening to a non-preset radio station Manual Tuning 1 2 3 Listening to the radio 1 2 3 You can use TYPE I (normal) tape. 1 2 3 Tape Playback Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB08TAP- 1 2 3 4 5 To stop recording 1 2 3 4 REC flashes in the display. Deck B standby for recording. 5 Adjusting the sound Selecting the preset effect 1 2 3 5 Adjusting the graphic equalizer or selecting the surround effect Selecting the MP3 Booster effect Selecting the sound system 1 2 To turn off the subwoofer To cancel the flashing effect To change the sound flash speed Creating a party environment (MHC-GNX100 only) 1 2 Selecting the speaker system Multiplex Effect Selecting audio channel 1 2 3 4 Singing along 1 2 3 5 6 7 Each time you press the button, the display changes as follows: 8 9 1 2 3 4 5 Turning off the display Power Saving Mode Display 1 DIMMER 2* DIMMER 1 DIMMER OFF SPECTRUM 4 1 The last selected spectrum setting appears in the display. 2 X-POS ON* y X-POS OFF 1 The last selected dimmer setting appears in the display. 2 Changing the spectrum analyzer display SPECTRUM 1 Changing the power illuminator Viewing information about the disc in the display Display Documents and Settings\Administrator\Desktop\MHC-GNX100 GB\GB09TIM-E3.fm] Checking the total playing time and titles Press DISPLAY repeatedly when playback is stopped. Each time you press the button, the display changes cyclically as follows: x When the play mode is other than PROGRAM x When the play mode is PROGRAM Hooking up optional components Optional Components Listening to a connected VCR, MD deck or DVD player 1 See Hooking up optional components on 2 Start playing the connected component. To switch between the VIDEO and MD function 1 See Hooking up optional components on 2 Making a digital recording from a disc onto a connected MD deck 1 See Hooking up optional components on 2 Refer to the operating instructions provided with the connected component. Listening to audio from a connected component Connecting external antennas 1 2 General Troubleshooting Problems and remedies When the ?/1 indicator flashes Speakers Disc player [2-547-453-11(2)] GB Tape deck continued Messages Use buttons on the unit for the operation. 1 2 3 4 One of the following messages may appear or flash in the display during operation. Disc Others On operating voltage On safety On placement On heat build-up Precautions On operation Notes on discs Additional Information Specifications MHC-GNX88 (HCD-GNX88)/MHC-GNX80 (HCD-GNX80) MHC-GNX88 (SS-WGV88)/GNX80 (SS-WG80) MHC-GNX77/GNX70 MHC-GNX66/GNX60 Disc player section Tape deck section continued Tuner section Page [2-547-453-11(2)] GB General masterpage:Left-3 (3 column) [2-547-453-11(2)] GB Main unit List of button locations and reference pages How to use page 54 to 56 DISPLAY rd (36, 38, 39) Page masterpage:Left-3 (3 column) Sony Corporation Subwoofer (MHC-GNX100/GNX88/GNX80 only) Remote control