Cisco Systems 8961 manual Wlan Setup Menu, Select button

Chapter 7 Configuring Settings on the Cisco Unified IP Phone

WLAN Setup Menu

WLAN Setup Menu

The WLAN Setup menu provides options for viewing and making a variety of network settings. Table 7-2describes these options and, where applicable, explains how to change them.

Note You can configure the WLAN settings only on the Cisco Unified IP Phone keypad. You must use the ac adapter when using the Cisco Unified IP Phone in WLAN mode. WLAN is disabled when Ethernet is connected.

For information about how to access the WLAN Setup menu, see the “Displaying a Setup Menu” section on page 7-2.

For information about the keys you can use to edit options, see the “Editing Values” section on page 7-3.

Table 7-2	WLAN Setup Menu Options
Option		Description	To Change
Wireless		Used to turn the wireless radio on Cisco Unified IP Phone	1. Scroll to the Wireless option,
		on or off. Valid values:	and use the toggle switch to
		• On—Turns the wireless radio on the phone on.	change the setting between on
			and off.
		• Off—Turns the wireless radio on the phone off.
			2. Press the Apply softkey.
		Default: On
WLAN Sign in Access		Enables the display of the WLAN Sign in Access window	1. Scroll to the Wireless Sign In
		in the main Applications menu:	option, and use the toggle switch
		• On—The WLAN Sign In Access window displays.	to change the setting between on
			and off.
		Turning this value on allows you to sign in or change
			2. Press the Apply softkey.
		your WLAN user ID and password on the main
		Applications menu. Otherwise, to change your login
		information, you would have to navigate down to the
		Security menu level and select either the LEAP or
		EAP-FAST methods, both of which require login
		credentials.
		• Off—The WLAN Sign In Access window does not
		display.
		Default: Off
IPv4 Setup		In the IPv4 Setup configuration submenu, you can do the	Scroll to IPv4 Setup and press the
		following:	Select button.
		• Enable or disable the phone to use the IP address that
		is assign by the DHCP server.
		• Manually set the IP Address, Subnet Mask, Default
		Routers, DNS Server, and Alternate TFTP servers.
		For more information on the IPv4 address fields, refer to
		Table 7-3.
MAC Address		Unique Media Access Control (MAC) address of the	Display only—Cannot configure.
		phone.

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

OL-20861-01 7-7