Appendix F Cisco Unified IP Phone Non-Lockable Wall Mount

ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones with Key Expansion Module

Figure F-17

Tab Location

345746

To remove the phone and mounting plate from the wall bracket, you must disengage these tabs.

Before You Begin

You require two screwdrivers or metal rods.

Step 1 Push the screw drivers into the left and right holes in the phone mounting plate until you feel resistance.

Step 2 Press firmly inwards (towards the phone) to disengage the tabs, lift up on the phone to release the phone from the wall bracket, and then pull the phone towards you.

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

 

F-18

OL-20861-01

 

 

 

Page 266
Image 266
Cisco Systems 8961 manual Figure F-17