Cisco Systems 8961 manual Adding Phones Using BAT Phone Template, Procedure

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network

Adding Phones to the Cisco Unified Communications Manager Database

Adding Phones with Cisco Unified Communications Manager Administration

You can add phones individually to the Cisco Unified Communications Manager database by using Cisco Unified Communications Manager Administration. To do so, you first need to obtain the MAC address for each phone.

For information about determining a MAC address, see the “Determining the MAC Address for a Cisco Unified IP Phone” section on page 2-13.

After you have collected MAC addresses, in Cisco Unified Communications Manager Administration, choose Device > Phone and click Add New to begin.

For complete instructions and conceptual information about Cisco Unified Communications Manager, go to the “Cisco Unified Communications Manager Overview” chapter in the Cisco Unified Communications Manager System Guide.

Related Topics

•Adding Phones with Auto-Registration, page 2-10

•Adding Phones with Auto-Registration and TAPS, page 2-11

•Adding Phones Using BAT Phone Template, page 2-12

Adding Phones Using BAT Phone Template

The Cisco Unified Communications Bulk Administration Tool (BAT) enables you to perform batch operations including registration on multiple phones.

To add phones using BAT only (not in conjunction with TAPS), you must obtain the appropriate MAC address for each phone.

For information about determining a MAC address, see the “Determining the MAC Address for a Cisco Unified IP Phone” section on page 2-13.

For detailed instructions about adding phones using Bulk Administration menu, refer to the Cisco Unified Communications Manager Bulk Administration Guide, chapter Inserting Phones.

To add a phone to the Cisco Unified Communications Manager, follow these steps:

Procedure

Step 1 From Cisco Unified Communications Manager, choose Bulk Administration > Phones > Phone Template.

Step 2 Click Add New.

Step 3 Choose a Phone Type and click Next.

Step 4 Enter the details of phone specific parameters like Device Pool, Phone Button Template, Device Security Profile and so on.

Step 5 Click Save.

Step 6 From Cisco Unified Communications Manager, choose Device > Phone > Add New to add a phone using an existing BAT phone template.

	Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
2-12	OL-20861-01