Chapter 10 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

Status Menu

Table 10-6 Video Statistics Items for the Cisco Unified Phone (continued)

Item

Description

 

 

Rcvr Resolution

Resolution of the video stream received by the phone from the remote

 

end point. VGA(640x480), CIF (352x288), QCIF (176x144), etc.

 

 

Sender Start Time

Timestamp indicating when the first RTP packet is sent to the network.

 

 

Rcvr Start Time

Timestamp indicating when the first RTP packet is received from the

 

network.

 

 

Latency

Estimate of the network latency, expressed in milliseconds. Represents

 

a running average of the round-trip delay, measured when RTCP

 

receiver report blocks are received.

 

 

Current Access Point Screen

The Current Access Point screen displays statistics about the current access point on the wireless Cisco Unified IP Phone 9971. Table 10-7describes the information that appears in this screen.

To display the Current Access Point screen, follow these steps:

 

Procedure

 

 

 

 

 

 

 

Step 1

Press the Applications button.

Step 2

Select Administrator Settings.

Step 3

Select Status.

 

 

 

Step 4

Select Current Access Point.

 

 

 

 

 

To exit the Current Access Point screen, press the Exit softkey.

 

Table 10-7

Current Access Point on the Cisco Unified IP Phone 9971

 

 

 

 

 

 

Item

 

Description

 

 

 

 

 

 

AP Name

 

Name of the AP if it is CCX-compliant; otherwise the MAC address is

 

 

 

displayed here.

 

 

 

 

 

 

MAC Address

 

MAC address of the AP.

 

 

 

 

 

 

Frequency

 

The latest frequency where this AP was observed.

 

 

 

 

 

 

Last RSSI

 

The latest RSSI in which this AP was observed.

 

 

 

 

 

 

Beacon Interval

 

Number of time units between beacons. A time unit is 1.024 ms.

 

 

 

 

 

 

Capability

 

This field contains a number of subfields that are used to indicate requested or

 

 

 

advertised optional capabilities.

 

 

 

 

 

 

Basic Rates

 

Data rates required by the AP at which the station must be capable of operating.

 

 

 

 

 

 

Optional Rates

 

Data rates supported by the AP that are optional for the station to operate at.

 

 

 

 

 

Current Channel

The latest channel where this AP was observed.

 

 

 

 

 

 

 

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

 

 

 

 

 

 

OL-20861-01

 

 

10-15

 

 

 

 

 

Page 185
Image 185
Cisco Systems 8961 manual Current Access Point Screen, Select Current Access Point, 10-15