Chapter 7 Configuring Settings on the Cisco Unified IP Phone

Ethernet Setup Menu

Table 7-1

Ethernet Setup Menu Options (continued)

 

 

 

 

 

 

Option

 

Description

To Change

 

 

 

 

 

SW Port Setup

 

Speed and duplex of the Network port. Valid values:

1.

Unlock network configuration

 

 

Auto Negotiate

 

options.

 

 

2. Scroll to the SW Port

 

 

1000 Full—1000-BaseT/full duplex

 

 

 

Configuration option and then

 

 

100 Half—100-BaseT/half duplex

 

 

 

 

press the Select softkey.

 

 

100 Full—100-BaseT/full duplex

3. Scroll to the setting that you

 

 

10 Half—10-BaseT/half duplex

 

want and then press the Select

 

 

10 Full—10-BaseT/full duplex

 

key.

 

 

 

 

 

 

If the phone is connected to a switch, configure the port

 

 

 

 

on the switch to the same speed/duplex as the phone, or

 

 

 

 

configure both to auto-negotiate.

 

 

 

 

If you change the setting of this option, you must change

 

 

 

 

the PC Port Configuration option to the same setting.

 

 

 

 

 

 

 

PC Port Setup

 

Speed and duplex of the Computer (access) port. Valid

1.

Unlock network configuration

 

 

values:

 

options.

 

 

Auto Negotiate

2. Scroll to the PC Port

 

 

1000 Full—1000-BaseT/full duplex

 

Configuration option and then

 

 

 

press the Select softkey.

 

 

100 Half—100-BaseT/half duplex

 

 

 

3. Scroll to the setting that you

 

 

100 Full—100-BaseT/full duplex

 

 

 

want and then press the Select

 

 

10 Half—10-BaseT/half duplex

 

key.

 

 

10 Full—10-BaseT/full duplex

To configure the setting on multiple

 

 

If the phone is connected to a switch, configure the port

phones simultaneously, enable the

 

 

Remote Port Configuration in the

 

 

on the switch to the same speed/duplex as the phone, or

 

 

Enterprise Phone Configuration

 

 

configure both to auto-negotiate.

 

 

(System > Enterprise Phone

 

 

 

 

 

 

If you change the setting of this option, you must change

Configuration).

 

 

the SW Port Configuration option to the same setting.

Note If the ports are configured for

 

 

 

 

 

 

 

 

 

Remote Port Configuration

 

 

 

 

 

in Unified CM, the data

 

 

 

 

 

cannot be changed on the

 

 

 

 

 

phone.

 

 

 

 

 

 

Related Topics

Displaying a Setup Menu, page 7-2

Unlocking and Locking Options, page 7-3

WLAN Setup Menu, page 7-7

IPv4 Setup Menu Options, page 7-10

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

7-6

OL-20861-01

 

 

Page 114
Image 114
Cisco Systems 8961 manual System Enterprise Phone, Configuration