Chapter 5 Setting Up the Cisco Unified Video Camera

Attaching the Cisco Unified Video Camera

Step 2 On the same window, enable the Video Capabilities parameter.

Step 3 Click Save.

Attaching the Cisco Unified Video Camera

To install the Cisco Unified Video Camera, you can either:

Attach the camera to your phone.

Attach the camera to your computer monitor (or to another object in your work area).

The USB port connector on the bottom of the Cisco Unified Video Camera attaches to the back port (not the side port) on the Cisco Unified IP Phone 9951 or 9971. As you attach the USB connector to the back port on the phone, the camera should slide easily into the camera pin holes on the phone.

Figure 3-4 on page 3-15shows the location of the back USB port and the camera pin holes for the Cisco Unified IP Phone 9951. Figure 3-6 on page 3-17shows the location of the back USB port and the camera pin holes for the Cisco Unified IP Phone 9971.

Installation Procedure

For the complete installation procedure, see the Cisco Unified Video Camera Quick Start Guide at this location:

http://www.cisco.com/en/US/products/ps10655/products_user_guide_list.html

Adjusting the Camera Settings

Once you have attached the camera on your phone, you can control the features of the camera. This section provides information on the features you can control from the phone:

Adjusting the Camera View Area, page 5-2

Adjusting the Brightness Setting, page 5-3

Adjusting Auto Transmit Setting, page 5-3

Adjusting the Camera View Area

The View Area feature acts as a wide angle and zoom function for your camera and allows you to adjust the view area that is shared during video streaming. The View Area feature acts as a wide angle and zoom function for your camera.

To adjust the camera view area, follow these steps:

Procedure

Step 1 On the Cisco Unified IP Phone, press the Applications button .

Step 2 Select Accessories.

Step 3 Highlight Cisco Unified Camera.

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

5-2

OL-20861-01

 

 

Page 88
Image 88
Cisco Systems 8961 Attaching the Cisco Unified Video Camera, Adjusting the Camera Settings, Adjusting the Camera View Area