Cisco Systems 8961 Unified Communications Manager Features, Services Guide, Call Pickup chapter

Chapter 8 Configuring Features, Templates, Services, and Users

Telephony Features Available for the Cisco Unified IP Phone

Table 8-1	Telephony Features for the Cisco Unified IP Phone (continued)
Feature		Description	Configuration Reference
Anonymous Call Block		Allows a user to reject calls from anonymous	For more information, go to the “SIP Profile
		callers.	Configuration” chapter in the Cisco Unified
			Communications Manager Administration
			Guide.
Any Call Pickup		Allows users to pick up a redirected call via the	For more information, refer to the Cisco
		CTI application, on any line in their call pickup	Unified Communications Manager Features
		group, regardless of how the call was routed to the	and Services Guide, “Call Pickup” chapter.
		phone.
Answer (oldest call)		Allows a user to answer the oldest call that is	No configuration required other than to make
		available on all line appearances on the user’s	this a programmable feature button.
		phone, including Hold Reversion and Park
		Reversion calls that are in an altering state.
Assisted Directed Call		Lets the end user press only one button to	For more information, see the Cisco Unified
Park		direct-park a call. This requires you to configure a	Communications Manager Features and
		BLF Directed Call Park button. Then, when the	Services Guide, “Configuring Directed Call
		user presses an idle BLF Directed Call Park feature	Park” section.
		button for an active call, the active call will be
		immediately parked at the Dpark slot associated
		with the Directed Call Park feature button.
Auto Answer		Connects incoming calls automatically after a ring	For more information, go to the “Directory
		or two.	Number Configuration” chapter in the Cisco
		Auto Answer works with either the speakerphone,	Unified Communications Manager
		or the headset.	Administration Guide.
Auto dial		Allows the phone user to choose from matching	Requires no configuration.
		numbers in the Placed Calls log while dialing. To
		place the call, the user can choose a number from
		the Auto Dial list or continue to enter digits
		manually.

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

OL-20861-01 8-3