Cisco Systems 8961 manual Park Monitoring

Chapter 8 Configuring Features, Templates, Services, and Users

Park Monitoring

Table 8-1	Telephony Features for the Cisco Unified IP Phone (continued)
Feature		Description	Configuration Reference
Video mode		Allows a user to select the video display mode for	For more information:
		viewing a video conference, depending on the	• Refer to Cisco Unified Communications
		modes configured in the system.
			Manager Administration Guide,
			“Conference Bridge Configuration”
			chapter.
			• Refer to Cisco Unified Communications
			Manager System Guide, “Understanding
			Video Telephony” chapter.
Video Support		Enables video support on the phone.	For more information refer to:
			• Cisco Unified Communications Manager
			Administration Guide, “Conference
			Bridge Configuration” chapter.
			• Cisco Unified Communications Manager
			System Guide, “Understanding Video
			Telephony” chapter.
			• Cisco VT Advantage Administration
			Guide, “Overview of Cisco VT
			Advantage” chapter.
VPN		Using SSL, provides a virtual private network	For more information, see Cisco Unified
		(VPN) connection on the Cisco Unified IP Phone	Communications Manager Security Guide,
		when it is located outside a trusted network or	Configuring Virtual Private Networks.
		when network traffic between the phone and
		Unified CM must cross untrusted networks.
Voice messaging		Enables callers to leave messages if calls are	For more information refer to:
system		unanswered.	• Cisco Unified Communications Manager
			Administration Guide, “Cisco Voice-Mail
			Port Configuration” chapter.
			• Cisco Unified Communications Manager
			System Guide, “Voice Mail Connectivity
			to Cisco Unified Communications
			Manager” chapter.

Park Monitoring

Park monitoring is supported only when a Cisco Unified IP Phone 8961, 9951, or 9971 parks a call. Park monitoring then monitors the status of a parked call. The park monitoring call bubble is not cleared until the parked call gets retrieved or is abandoned by the parkee. This parked call can be retrieved using the same call bubble on the parker’s phone.

The following sections describe the options for configuring park monitoring:

•Setting the Service Parameters for Park Monitoring, page 8-24

•Setting Park Monitoring Parameters in Directory Number Configuration Window, page 8-25

•Setting Park Monitoring Parameter in Hunt Pilot Configuration Window, page 8-25

	Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01		8-23