Chapter 8 Configuring Features, Templates, Services, and Users

Configuring Corporate and Personal Directories

Override Common Settings Check Box

When you set the parameters, select the Override Common Settings check box for each setting you wish to update. If you do not check this box, the corresponding parameter setting does not take effect. If you set the parameters at the three configuration windows, the setting takes precedence in the following order:

Phone Configuration window

Common Phone Profile window

Enterprise Phone Configuration window

Configuring Corporate and Personal Directories

The Contact button on the Cisco Unified IP Phone gives users access to several directories. These directories can include:

Corporate Directory—Allows a user to look up phone numbers for co-workers.

To support this feature, you must configure corporate directories. See the “Configuring Corporate Directories” section on page 8-27for more information.

Personal Directory—Allows a user to store a set of personal numbers.

To support this feature, you must provide the user with software to configure the personal directory. See the “Configuring Personal Directory” section on page 8-27for more information.

Configuring Corporate Directories

Cisco Unified Communications Manager uses a Lightweight Directory Access Protocol (LDAP) directory to store authentication and authorization information about users of Cisco Unified Communications Manager applications that interface with Cisco Unified Communications Manager. Authentication establishes the users’ rights to access the system. Authorization identifies the telephony resources that a user is permitted to use, such as a specific phone extension.

After completing the LDAP directory configuration, users can use the Corporate Directory service on their phone to look up users in the corporate directory.

Configuring Personal Directory

Personal Directory consists of the following features:

Personal Address Book (PAB)

Speed Dials

Address Book Synchronization Tool (TABSynch)

Users can access Personal Directory features by these methods:

From a web browser—Users can access the PAB and Speed Dials features from the Cisco Unified Communications Manager User Options web pages

From the Cisco Unified IP Phone—Choose Contacts to search the corporate directory or the user’s personal directory.

 

 

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

 

 

 

 

 

 

OL-20861-01

 

 

8-27

 

 

 

 

 

Page 153
Image 153
Cisco Systems 8961 manual Configuring Corporate and Personal Directories, Configuring Corporate Directories