Display On and Off Configuration Fields | Cisco Systems 8961

Chapter 9 Customizing the Cisco Unified IP Phone

Automatically Disabling the Cisco Unified IP Phone Display

Table 9-1	Display On and Off Configuration Fields

Field		Description

Days Display Not Active		Days that the display does not turn on automatically at the time specified in
		the Display On Time field.
		Choose the day or days from the drop-down list. To choose more than one
		day, Ctrl-click each day that you want.

Display On Time		Time each day that the display turns on automatically (except on the days
		specified in the Days Display Not Active field).
		Enter the time in this field in 24 hour format, where 0:00 is midnight.
		For example, to automatically turn the display on at 7:00 a.m., (0700), enter
		7:00. To turn the display on at 2:00 p.m. (1400), enter 14:00.
		If this field is blank, the display will automatically turn on at 0:00.
		The default value is 07:30.

Display On Duration		Length of time that the display remains on after turning on at the time
		specified in the Display On Time field.
		Enter the value in this field in the format hours:minutes.
		For example, to keep the display on for 4 hours and 30 minutes after it turns
		on automatically, enter 4:30.
		If this field is blank, the phone will turn off at the end of the day (0:00).
		Note If Display On Time is 0:00 and the display on duration is blank (or
		24:00), the display will remain on continuously.
		The default value is 10:30.

Display Idle Timeout		Length of time that the phone is idle before the display turns off. Applies
		only when the display was off as scheduled and was turned on by an end-user
		(by pressing the Select button on the phone).
		Enter the value in this field in the format hours:minutes.
		For example, to turn the display off when the phone is idle for 1 hour and 30
		minutes after an end-user turns the display on, enter 1:30.
		The default value is 1:00.

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

9-8	OL-20861-01

Image 170

Cisco Systems 8961 manual Display On and Off Configuration Fields

Contents

Americas Headquarters Text Part Number OL-20862-01Page N T E N T S Iii Manager Key Expansion Module Settings on the Phone Interacting with Cisco Unified Wireless APs Configuring Personal Directory Vii Status Menu Viii Technical Specifications Installing the Wall Mount for the Cisco Unified IP Phone E-1 Organization OverviewAudience Chapter Description Xii Cisco Unified IP Phones 8961, 9951, Related DocumentationCisco Product Security Overview Xiii Boldface font Document ConventionsConvention Description Xiv An Overview of the Cisco Unified IP Phone 1shows the main components of the Cisco Unified IP Phone 1describes the buttons on the Cisco Unified IP Phone Features on the Cisco Unified IP Phone 2shows the main components of the Cisco Unified IP Phone 2describes the buttons on the Cisco Unified IP Phone Features on the Cisco Unified IP Phone 3shows the main components of the Cisco Unified IP Phone 3describes the buttons on the Cisco Unified IP Phone Features on the Cisco Unified IP Phone Communications Manager System Guide What Networking Protocols are Used?Networking Protocol Purpose Usage Notes Authentication on Cisco Unified IP Phones section URL Nologieswhitepaper0900aecd804cd46d.shtml See the LLDP-MED and Cisco Discovery ProtocolWhite paper SIP System Guide Feature OverviewCisco Unified Communications Manager UDP Configuring Telephony Features Related Topic Topic Reference Providing Users with Feature InformationSee the Overview of Supported Security Features section on See the Security Restrictions section on Manager Overview of Supported Security FeaturesUnified Communications Manager Security Guide IP Phone section on page 3-21for more information Choose AdministratorFeature Description Cisco Unified Communications Manager Security Guide Phones section on page 1-22for more information Understanding Security Profiles Identifying Secure Encrypted Phone Calls Establishing and Identifying Secure Calls Security Restrictions with Conference Calls Supporting 802.1X Authentication on Cisco Unified IP Phones Overview Security Restrictions OL-20861-01 Purpose For More Information Communications Manager Administration Administration Guide Task Purpose For More Information Chapter in the Cisco Unified Communications Manager Installing Cisco Unified IP Phones See the Ethernet Setup Menu section on See the Configuring Startup NetworkSettings section on Wireless Network Refer to the Cisco Unified IP Phone User Guide Administration GuideTerminology Information 9951, and 9971 User Guide for Cisco A P T E R Cisco Communications Manager Administration Guide Providing Power to the Cisco Unified IP Phone Reducing Power Consumption on the Phone Power GuidelinesPower Outage Power Type Guidelines Power Negotiation over Lldp Obtaining Additional Information About Power Understanding Phone Configuration Files Understanding the Phone Startup Process Purpose Related Topics Refer to Cisco Unified Communications Manager Security Task Purpose Related Topics Request the configuration fileConfiguration file defines how the Cisco Unified IP Phone Information for the phone Requires MAC Method Address? Tool BAT updates information in the Cisco UnifiedAdding Phones with Auto-Registration Taps Adding Phones with Auto-Registration and Taps Adding Phones Using BAT Phone Template Procedure Determining the MAC Address for a Cisco Unified IP Phone OL-20861-01 Before You Begin Network Requirements Cisco Unified Communications Manager Configuration Understanding the Cisco Unified IP Phone Components Network and Computer Ports Handset Rest Third-Party Accessories Accessory TypeCisco Accessory Speakerphone External Speakers and Microphone HeadsetsUSB Port Data Information Disabling a Wired Headset Audio Quality Subjective to the User Disabling the USB Headset Select AccessoriesHighlight the analog headset, then press the Setup softkey Wireless Headsets Adding a Bluetooth Wireless Headset to the Phone Select Add Bluetooth Accessory Press the Applications button User guides that were provided with your headset Installing the Cisco Unified IP Phone Using External Devices Section on page 3-3for guidelines See the Headsets section on page 3-5forSee the Network and Computer Ports Wlan Cisco Unified IP Phone 8961 Connections Back Cisco Unified IP Phone 8961 Cable Connections Side Cisco Unified IP Phone 9951 Cable Connections Back Cisco Unified IP Phone 9951 Cable Connections Side Cisco Unified IP Phone 9971 Cable Connections Back Cisco Unified IP Phone 9971 Cable Connections Side Connecting the Footstand Cisco Unified IP Phone 8961, 9951, Mounting the Phone to the Wall Phone Display Viewing AngleSecuring the Phone with a Cable Lock Verifying the Phone Startup Process Configuring Startup Network SettingsConfiguring Security on the Cisco Unified IP Phone To configure an LSC on the phone, perform these steps Before You Begin Setting Up the Cisco Unified IP Color Key Expansion Module Cisco Unified IP Phone Model KEMs Supported Removing a Key Expansion Module, Troubleshooting, Power InformationConnecting a Single KEM to the Cisco Unified IP Phone Power Consumption 206800 Cisco Unified IP Phone with Three KEMs Attached Key Expansion Module Settings on the Phone Upgrading the Key Expansion Module Removing a Key Expansion Module TroubleshootingKEM starts to upgrade Setting Up the Cisco Unified Video Camera Configuring the Cisco Unified Video Camera Installation Procedure Adjusting the Camera SettingsAdjusting the Camera View Area Select Accessories Highlight Cisco Unified Camera Select View Area Adjusting the Brightness SettingAdjusting Auto Transmit Setting Select Brightness Post-Installation Steps Using the Cisco Unified Video Camera Understanding the VoIP Wireless Network Understanding the Wireless LAN Understanding Wlan Standards and Technologies This section describes the following concepts UNII-2 Standards for Wlan CommunicationsPart Number Band Range UNII-3 World Mode 802.11d Supported Countries Standard Data Rates, Tx Power, Ranges, and Decibel TolerancesRadio Frequency Ranges Data Rate Range Receiver Sensitivity 802.11a 802.11b 802.11g 802.11a Wireless Modulation TechnologiesData Rate Range Receiver Sensitivity 802.11b Dsss Ofdm AP, Channel, and Domain Relationships Bluetooth Wireless TechnologyVoice QoS in a Wireless Network, VoIP Wlan Configuration, WLANs and Roaming Associating to APs Components of the VoIP Wireless NetworkInteracting with Cisco Unified Wireless APs Voice QoS in a Wireless Network Network OL-20861-01 Interacting with Cisco Unified Communications Manager Authentication MethodsSecurity for Voice Communications in WLANs This section contains the following items Authenticated Key Management Or Cckm Choosing AP Authentication and Encryption MethodsEncryption Methods Pre-shared key, WPA2 Pre-shared key, or Cckm Cisco Unified IP Phone Cisco AP Configuration Key CommonManagement Encryption Authentication Supported APs and Modes VoIP Wlan ConfigurationSupported Access Points Unified Configuring Wireless LAN Supported Antennas OL-20861-01 OL-20861-01 Configuring Settings on the Cisco Unified IP Phone Setup Menus on the Cisco Unified IP Phone Displaying a Setup Menu To display a submenu repeat Step Unlocking and Locking Options IPv4 Setup Menu Options, Security Setup Menu,Displaying a Setup Menu, Editing Values Select button Ethernet Setup MenuOption Description To Change PC Vlan Configuration System Enterprise Phone Wlan Setup Menu Ssid Option Description To Change IPv4 Setup Menu Options To Cisco Unified Communications Manager Security Guide Cisco Unified Communications Manager Security LSC Security Setup MenuSee the 802.1X Authentication and Transaction For this phone Section in Cisco Unified Communications To the Configuring the Cisco CTL ClientTrust List Menu Manager Security Guide 802.1X Authentication and Transaction Status Procedure Steps VPN Configuration MenuUse this procedure to connect through VPN VPN Enabled If Auto-Detect Network Connection is disabled Choose Applications VPN OL-20861-01 Configuring Features, Templates, Services, and Users System Service Parameter and select Feature Description Configuration ReferenceFeatures and Services Guide, Barge System Guide, Cisco Unified IP Phones Communications Manager Features Unified Communications Manager FeaturesServices Guide, Call Pickup chapter Unified Communications Manager Phone Configuration chapter Configuration System Enterprise PhoneAdministration Guide, Cisco Unified IP Administration Guide, Feature Control Device Phone Services GuideManager Features and Services Guide BLF Display Restrictions chapter Features and Services Guide, Cisco CallFeatures and Services Guide, Call Cisco Unified Communications Administration Guide, DirectoryForward Maximum Hop Count service parameter Services Guide, Monitoring and Recording Configure the call pickup feature to supportDuring a call when it is being recorded Incoming call information on the phone screen Extention Mobility chapter in the Cisco Communications Features and ServicesSystem Guide, Understanding Route Services Guide, Cisco Extension Features and Services GuideAdministration Divert, go to the Cisco Unified IP Phone Choose Device Device DefaultsFrom the Bulk Administration Load Information field Book or Speed Dials, Services Guide, External Call ControlPhone Button Template for Personal Address Administration Guide, Hunt Group Configuration chapter Chapters of Cisco Unified Communications Communications Manager FeatureManager Administration Guide Features and Services Guide, Malicious Administration Guide, Message Waiting Unified Communications Manager SIP Services Guide, Call Park and DirectedUnified IP Phone 9971 User Guide for Cisco Monitoring section on Simultaneously Go to Product Specific ConfigurationLayout area and select Enable from Peer Firmware Sharing may also aid in firmware Plar Features and Services Guide BargeAdministration Guide, Phone Button Unified Communications Manager Security Report Tool chapter Features and Services Guide, QualityQRT Creating Custom Phone Rings section OL-20861-01 Services Guide, Cisco Unified Mobility Administration Guide, ConferenceBridge Configuration chapter Features and Services Guide, Cisco Unified System Guide, Time-of-Day Routing Administration Guide, Time PeriodAdministration Guide, Date/Time Group Park Monitoring Setting the Service Parameters for Park Monitoring Field Description Field Description Rtcp Configuring Product Specific Configuration ParametersList of Parameters Configuring Personal Directory Configuring Corporate and Personal DirectoriesConfiguring Corporate Directories Override Common Settings Check Box Button Softkey Feature Buttons and SoftkeysDedicated Feature Mcid Modifying Phone Button TemplatesModifying a Phone Button Template for All Calls Secure Service URL For PAB, enter the following URL Configuring Feature Control Policies Unified Communications Manager Administration Guide Setting Up ServicesFeature Default Value Adding Users to Cisco Unified Communications Manager Click Add Selected Giving Users Access to the User Options Web PagesManaging the User Options Web Pages OL-20861-01 Specifying Options that Appear on the User Options Web Pages Customizing and Modifying Configuration Files Customizing the Cisco Unified IP Phone Creating Custom Phone Rings Ringlist.xml File Format Requirements Configuring a Custom Phone Ring PCM File Requirements for Custom Ring Types List.xml Example Creating Custom Background ImagesList.xml File Format Requirements Configuring a Custom Background Image PNG File Requirements for Custom Background Images Configuring Wideband Codec Configuring the Idle Display Automatically Disabling the Cisco Unified IP Phone Display Display On and Off Configuration Fields Information Model Information ScreenModel Information Screen, Status Menu, 10-1 Status Menu 10-2 Select Status Messages Select Administrator SettingsStatus Messages Screen Message Description Possible Explanation and Action On assigning a static IP address Ethernet Setup Menu section on page 7-4for detailsIf you are using DHCP, check the Dhcp server Menu section on page 7-4section for details 10-5 Unified CM Security Guide 10-6 Ethernet Statistics Screen 10-7 Select Status Ethernet Statistics 10-8 Select Wlan Statistics Wlan Statistics ScreenPort IPv4 10-9 10-10 Select Call Statistics Call Statistics ScreenSelect Status Call Statistics screen displays these items Cisco Unified IP Phone uses Voice-Quality MetricsMOS LQK 10-12 Select Administrator Settings Select Call Statistics 10-13 10-14 10-15 Current Access Point ScreenSelect Current Access Point 10-16 Monitoring the Cisco Unified IP Phone Remotely 11-1 Accessing the Web Page for a Phone 11-2 Choose Device Phone Enabling and Disabling Web Page AccessClick Apply Config 11-3 11-4 Device InformationUDI 11-5 Network SetupAbout other phone settings. -2describes these items 11-6 11-7 Network Statistics 11-8 11-9 Lldp 11-10 5describes the items in the Streaming Statistics areas Device LogsStreaming Statistics 11-11 IP Phone uses 11-12 11-13 Configuring Settings on the Cisco Unified IP Phone chapterVoice Quality Metrics 11-14 Resolving Startup Problems 12-1 12-2 Identifying Error Messages 12-3 Choose Tools Control Center Feature Services 12-4 Experiencing problems Resolve, the configuration file may be corruptedTo create a new configuration file, follow these steps 12-5 Verifying the Physical Connection Cisco Unified IP Phone Resets UnexpectedlySymptom Cisco Unified IP Phone Unable to Obtain IP Address Identifying Intermittent Network Outages Verifying the Voice Vlan Configuration Verifying Dhcp SettingsChecking Static IP Address Settings Verifying that the Phones Have Not Been Intentionally Reset 12-8 Eliminating DNS or Other Connectivity ErrorsChecking Power Connection 12-9 Troubleshooting Cisco Unified IP Phone SecurityProblem Possible Cause 12-10 General Troubleshooting TipsSummary Explanation Displaying these statistics 12-11 12-12 To resolve this problem, re-enable the port from the switchHalfduxcollisionexceedthreshold 12-13 12-14 12-15 Resetting the Cisco Unified IP PhonePerforming Explanation 12-16 Using the Quality Report ToolMonitoring the Voice Quality of Calls Troubleshooting Tips Where to Go for More Troubleshooting InformationCleaning the Cisco Unified IP Phone Metric Change Condition 12-18 Providing Information to Users Via a Website How Users Access a Voice Messaging System How Users Configure Personal Directory Entries Installing the Synchronizer Configuring the Synchronizer Supporting International Users Support for International Call Logging OL-20861-01 Physical and Operating Environment Specifications Specification Value or Range Network and Computer Port Pinouts Cable SpecificationsNetwork Port Connector Pin Number Function Computer Port Connector Table C-3describes the Computer port connector pinouts OL-20861-01 Basic Phone Administration Steps Example User Information for these Procedures Choose System Ldap Ldap Directory Proceed to Configuring the Phone, page D-3Adding a User From an External Ldap Directory Click Perform Full Sync Now Example johndoe Configuring the PhoneProceed to the section Configuring the Phone, page D-3 Example doe OL-20861-01 OL-20861-01 Click Device Associations Performing Final End User Configuration StepsChoose User Management End User Installing the Wall Mount for Cisco Unified IP Phone Installing the Bracket Before You Begin Figure E-2 Mounting the Wall Bracket Figure E-3 Attaching the Phone Bracket Figure E-4 Preparing the Handset Hook Figure E-5 Attaching the Cables Figure E-6 Attaching the Phone to the Wall Bracket Machine Installing the Bracket Figure E-8 Mounting the Wall Bracket Figure E-9 Attaching the Phone Bracket Figure E-10 Preparing the Handset Hook Figure E-11 Plugging the Power Cord into the Phone Figure E-12 Attaching the Phone to the Wall Bracket Cisco Unified IP Phone Non-Lockable Wall Mount 345749 Components Ethernet Cable Wall bracket Install Non-Lockable Wall Mount for phone Figure F-4 Mount the Wall Bracket Figure F-5 Attach the Phone Bracket Figure F-6 Remove Phone from Non-Lockable Wall Mount Figure F-7 Attach phone to wall bracket Figure F-8 Tab location Figure F-9 345743 Screws Anchors Phone bracket Before You Begin Figure F-13 Bracket Installation Figure F-14 Attach Phone Bracket Figure F-15 Figure F-16 Attach Phone to Wall Bracket Figure F-17 Figure F-18 OL-20861-01 Numerics IN-1 Cast Technical specifications Using Ldap directoriesCall waiting Capf Certificate Authority Proxy Function IN-2 DND IN-3 USB Using Wired Headset port Hold Hold reversion HttpEthernet Statistics screen HTTP, description Https IN-5 MICCast CDP Dhcp Http Rtcp RTP SIP TCP Tftp UDP IN-6 IN-7 IntentionallyTrust List Security profiles IN-8 IN-9 VPN TftpDNS IN-10