Follow these steps to configure the Sharp MFP Module:
1.On the RightFax server, select Start > All Programs > RightFax EDC Monitor to open the EDC Monitor application.
If the Sharp MFP module has been added correctly and the services are running, then Sharp_Repository will appear in the Sources pane along with Sharp status messages in the other panes.
Figure 3.1 Sharp status messages in EDC Monitor
2.Select Tools > Advanced EDC Configuration to open the Captaris EDC Configuration dialog box.
3.Click the Modules tab.
RightFax MFP Module 2.5 Guide for the Sharp Extension | 22 |
4.Select Sharp MFP in the list of modules and click Edit. This opens the Sharp Module Configuration dialog box.
Figure 3.2 The Sharp Module Configuration dialog box
5.Select DeviceRepository and click Edit. This opens the Editing Macro DeviceRepository dialog box.
Figure 3.3 Entering the location of the Sharp repository folder
The repository folder must be located on an IIS server on your network and be a subfolder of the \Inetpub\ftproot folder. All of the instructions in this guide assume that you will be using a subfolder called Sharp.
