Chapter 7 Configuring Settings on the Cisco Unified IP Phone

Setup Menus on the Cisco Unified IP Phone

IPv4 Setup Menu Options, page 7-10

Security Setup Menu, page 7-13

Unlocking and Locking Options

You can apply a password to the phone so that no changes can be made to the administrative options on the phone without the password being entered on the Administrator Settings phone screen.

To apply a password to the phone, in Cisco Unified Communications Manager administration, navigate to the Common Phone Profile Configuration window (Device > Device Settings > Common Phone Profile). Enter a password in the Local Phone Unlock Password option. Apply the password to the common phone profile that the phone uses.

Related Topics

Displaying a Setup Menu, page 7-2

Editing Values, page 7-3

Ethernet Setup Menu, page 7-4

WLAN Setup Menu, page 7-7

IPv4 Setup Menu Options, page 7-10

Editing Values

When you edit the value of an option setting, follow these guidelines:

Use the arrows on the navigation pad to highlight the field you wish to edit, then press the Select button of the navigation pad to activate that field. (You can also double-tap on an editable field to activate it for editing.) Once the field is activated, you can enter values.

Use the keys on the keypad to enter numbers and letters.

To enter letters by using the keypad, use a corresponding number key. Press the key one or more times to display a particular letter. For example, press the 2 key once for “a,” twice quickly for “b,” and three times quickly for “c.” After you pause, the cursor automatically advances to allow you to enter the next letter.

Press the arrow softkey

if you make a mistake. This softkey deletes the character to the left of

the cursor.

 

Press the Cancel softkey before pressing the Save softkey to discard any changes that you have made.

To enter an IP address, you enter values into four segments already divided for you. When you are done entering the leftmost digits before the first period, use the right arrow key to move to the next segment. The period that follows the leftmost digits is automatically inserted.

Note The Cisco Unified IP Phone provides several methods you can use to reset or restore option settings, if necessary. For more information, see the “Resetting the Cisco Unified IP Phone” section on page 12-15.

Related Topics

Displaying a Setup Menu, page 7-2

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

 

OL-20861-01

7-3

 

 

 

Page 111
Image 111
Cisco Systems 8961 manual Unlocking and Locking Options, Editing Values, IPv4 Setup Menu Options, Security Setup Menu