Lexmark 436 Reports menu, Universal Setup menu, Units of Measure, Portrait Width, Portrait Height

Understanding printer menus 132

Universal Setup menu

Use	To
Units of Measure	Specify the unit of measure.
Inches	Note: Inches is the U.S. factory default setting. Millimeters is the
Millimeters	international factory default setting.
Portrait Width	Set the width for portrait orientation.
3–8.5 inches	Notes:
76–215.9 mm
	• If the width exceeds the maximum, then the printer uses the
	maximum width allowed.
	• 8.5 inches is the U.S. factory default setting. You can increase the
	width in 0.01‑inch increments.
	• 215.9 mm is the international factory default setting. You can
	increase the width in 1‑mm increments.
Portrait Height	Set the height for portrait orientation.
3–14.17 inches	Notes:

76–360 mm

•If the height exceeds the maximum, then the printer uses the maximum height allowed.

•14 inches is the U.S. factory default setting. You can increase the height in 0.01‑inch increments.

•356 mm is the international factory default setting. You can increase the height in 1‑mm increments.

Reports menu

Reports menu

Use	To
Menu Settings Page	Print a report containing information about the paper loaded in trays, installed
	memory, total page count, alarms, timeouts, printer control panel language,
	TCP/IP address, status of supplies, status of the network connection, and other
	information.
Device Statistics	Print a report containing printer statistics such as supply information and details
	about printed pages.
Network Setup Page	Print a report containing information about the network printer settings, such as
	the TCP/IP address.
	Note: This menu item appears only in network printers or printers connected
	to print servers.
Network [x] Setup Page	Print a report containing information about the network printer settings, such as
	the TCP/IP address.
	Note: This menu item appears only when there is more than one network
	option installed and only in network printers or printers connected to print
	servers.