Lexmark 436 Print Settings menu, Contrast, Mirror Image, Negative Image, Shadow Detail, Sharpness

Understanding printer menus		181
	Use	To
	Contrast	Specify the contrast of the output.
	0–5	Note: “Best for content” is the factory default setting.
	Best for content
	Mirror Image	Create a mirror image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible on a scanned image.
	‑4 to 4	Note: 0 is the factory default setting.
	ADF Skew Fix	Correct the slight skew in the scanned image.
	Auto	Note: Off is the factory default setting.
	Off
	On
	Scan edge to edge	Allow edge-to-edge scanning of the original document.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness on a scanned image.
	1–5	Note: 3 is the factory default setting.
	Temperature	Specify “warm” or “cool” outputs.
	‑4 to 4	Notes:
		• 0 is the factory default setting.
		• "Cool” values generate a bluer output than the default while “warm” values
		generate a redder output than the default.

Print Settings menu

Use	To
Copies	Specify a default number of copies for each print job.
1–999	Note: 1 is the factory default setting.
Paper Source	Set a default paper source for all print jobs.
Tray [x]	Note: Tray 1 is the factory default setting.
MP Feeder
Manual Paper
Manual Envelope
Color	Specify whether the device captures and transmits content in color or in black and white.
Color	Note: Color is the factory default setting.
Black Only