Lexmark 436 manual Solving copy problems, The print appears tinted, Step, support

Troubleshooting		302
Action	Yes	No
Step 3	The problem is solved.	Contact customer
Make sure you are using a recommended type of color transparency, and		support.
then resend the print job.
Does the print on the color transparency look lighter?

The color of the print does not match the color of the original file

Note: The color conversion tables used in Auto Color Correction mode generally approximate the colors of a standard computer monitor. However, because of technology differences that exist between printers and monitors, there are many colors that can also be affected by monitor variations and lighting conditions.

Action	Yes	No
Step 1	The problem is solved.	Go to step 2.

aSet Color Correction to Off.

Note: When the printer color correction is disabled, the color is based on the print job information, and no color conversion is implemented.

bResend the print job.

Does the color of the print match the color of the file on the computer
screen?
Step 2	The problem is solved. Contact customer
From the Quality menu on the printer control panel, do the following:	support.

aSelect Color Correction, and then select Manual.

bSelect Manual Color, and then select the appropriate color conversion table for the affected object type.

cResend the print job.

Does the color of the print match the color of the file on the computer screen?

The print appears tinted

Action	Yes	No
Adjust the color balance.	The problem is solved.	Contact customer
a From the Color Balance menu on the printer control panel, increase		support.
or decrease the values for cyan, magenta, yellow, and black.
b Resend the print job.
Does the print still appear tinted?

Solving copy problems

•“Copier does not respond” on page 303