Lexmark 436 manual Understanding printer menus 155

Understanding printer menus		155
	Use	To
	Allow color copies	Enable color in copies.
	On	Notes:
	Off
		• On is the factory default setting.
		• Setting this to Off hides all color‑specific menus.
		• This setting overrides the Color setting.
	Sides (Duplex)	Specify whether an original document is two‑sided (duplex) or one‑sided, and then
	1 sided to 1 sided	specify whether the copy should be two‑sided or one‑sided.
	1 sided to 2 sided	Notes:
	2 sided to 1 sided	• 1 sided to 1 sided—The original document has print on one side, and the copy
	2 sided to 2 sided
		will also have print on one side.
		• 1 sided to 2 sided—The original document has print on one side, while the
		copy will have print on both sides.
		• 2 sided to 1 sided—The original document has print on both sides, while the
		copy will have print on just one side.
		• 2 sided to 2 sided—The original document has print on both sides, and the
		copy will also have print on both sides.
	Paper Saver	Allow copying of two or four sheets of a document on one page.
	Off	Note: Off is the factory default setting.
	2‑up Portrait
	2‑up Landscape
	4‑up Portrait
	4‑up Landscape
	Print Page Borders	Allow page borders in printed copies.
	On	Note: Off is the factory default setting.
	Off
	Collate	Keep the pages of a print job stacked in sequence when printing multiple copies.
(1,1,1) (2,2,2)		Note: "(1,2,3) (1,2,3)” is the factory default setting.
(1,2,3) (1,2,3)