Lexmark 436 manual Timeouts

Understanding printer menus		152
	Use	To
	Timeouts	Set the printer to follow the setting of “Hibernate Timeout” even
	Hibernate Timeout on Connection	when an active Ethernet or fax connection exists.
	Hibernate	Notes:
	Do Not Hibernate	• Do Not Hibernate is the factory default setting.
		• If “Hibernate Timeout on Connection” is set to Do Not
		Hibernate, then the device never automatically hibernates.
		• If “Hibernate Timeout on Connection” is set to Hibernate,
		then the device follows the value of the “Hibernate Timeout”
		setting, except when it is set to Disabled.
	Timeouts	Set the amount of time in seconds the printer waits before
	Screen Timeout	returning the printer display to Ready state.
	15–300	Note: 30 is the factory default setting.
	Timeouts	Set the printer to continue the specified job without returning to
	Prolong Screen Timeout	the home screen when the screen timeout timer expires.
	On	Notes:
	Off	• Off is the factory default setting. This follows the normal
		Screen Timeout expires workflow.
		• On continues to show the same screen and allows the user
		to reset the Screen Timeout timer instead of returning to the
		home screen.
	Timeouts	Set the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print
	Disabled	job.
	1–255	Notes:
		• 90 is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed, and then the printer checks to see if any
		new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print jobs.
	Timeouts	Set the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job.
	Disabled	Notes:
	15–65535	• 40 is the factory default setting.
		• Wait Timeout is available only when the printer is using
		PostScript emulation. This setting has no effect on PCL
		emulation print jobs.