Lexmark 436 manual Close flatbed cover and load originals if restarting job 2yy.xx

Troubleshooting 256

Close flatbed cover and load originals if restarting job [2yy.xx]

Try one or more of the following:

•Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan job.

•Touch Scan from flatbed to continue scanning from the scanner glass immediately after the last successful scan job.

•Touch Finish job without further scanning to end the last successful scan job.

Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying, faxing, or e-mailing.

•Touch Cancel job to clear the message and cancel the scan job.

[Color] cartridge low [88.xy]

You may need to order a toner cartridge. If necessary, select Continue to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

[Color] cartridge nearly low [88.xy]

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

[Color] cartridge very low, [x] estimated pages remain [88.xy]

You may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.

If necessary, select Continue on the printer control panel to clear the message and continue printing. For

non‑touch‑screen printer models, press to confirm.

Complex page, some data may not have printed [39]

Try one or more of the following:

•From the printer control panel, select Continue to ignore the message and continue printing. For non‑touch‑screen

printer models, press to confirm.

•Cancel the current print job. For non‑touch‑screen printer models, press to confirm.

•Install additional printer memory.

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:

•The printer firmware has been updated.

•The tray for the print job is removed.