Lexmark 436 manual Setting up Scan to Computer, Click Next Close

Scanning 117

5Type a scan name.

Note: The scan name is the name that appears in the Scan Profile list on the display.

6Click Submit.

Note: Clicking Submit automatically assigns a shortcut number. You can use this shortcut number when you are ready to scan your documents.

7Review the instructions on the Scan Profile screen.

aLoad an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

bIf you are loading a document into the ADF tray, then adjust the paper guides.

cDo either of the following:

•Press #, and then enter the shortcut number using the keypad.

Note: The scanner scans and sends the document to the directory you specified.

•From the home screen, navigate to:

Held Jobs > Profiles > locate your shortcut on the list.

8View the file from the computer.

Note: The output file is saved in the location or launched in the program you specified.

Setting up Scan to Computer

Notes:

• This feature is supported only in Windows Vista or later.

• Make sure that your computer and printer are connected to the same network. 1 Open the printers folder.

aClick .

bIn the Start Search dialog, type Run.

cIn the Run dialog, type control printers.

dPress Enter, or click OK.

2Depending on your operating system, click Add a device or Add a printer.

3Select your printer from the list.

Note: To identify your printer, print a network setup page, and then look for “Fully Qualified Domain Name” in the TCP/IP section.

4Click Next > Close.

5From the printers folder, right‑click the printer, and then click Scan Properties or Properties to configure the scan settings.