Lexmark 436 Installing the printer on an Ethernet network, For Windows users, For Macintosh users

Additional printer setup 39

Installing the printer on an Ethernet network

For Windows users

1Insert the Software and Documentation CD.

If the installation dialog does not appear after a minute, then launch the CD manually:

aClick , or click Start and then click Run.

bIn the Start Search or Run dialog, type D:\setup.exe, where D is the letter of the CD or DVD drive.

cPress Enter, or click OK.

2Click Install, and then follow the instructions on the computer screen.

3Select Ethernet connection, and then click Continue.

4Attach the Ethernet cable when instructed to do so.

5Select the printer from the list, and then click Continue.

Note: If the configured printer does not appear in the list, then click Modify Search.

6Follow the instructions on the computer screen.

For Macintosh users

1Allow the network DHCP server to assign an IP address to the printer.

2Obtain the printer IP address either:

•From the printer control panel

•From the TCP/IP section in the Network/Ports menu

•By printing a network setup page or menu settings page, and then finding the TCP/IP section

Note: You will need the IP address if you are configuring access for computers on a different subnet than the printer.

3Install the printer driver on the computer.

aInsert the Software and Documentation CD, and then double‑click the installer package for the printer.

bFollow the instructions on the computer screen.

cSelect a destination, and then click Continue.

dFrom the Easy Install screen, click Install.

eType the user password, and then click OK.

All the necessary applications are installed on the computer.

fClick Close when installation is complete.

4Add the printer.

•For IP printing:

aFrom the Apple menu, navigate to either of the following:

–System Preferences > Print & Scan

–System Preferences > Print & Fax

bClick +.

cClick the IP tab.

dType the printer IP address in the address field, and then click Add.