Lexmark 436 manual Finishing menu, Download Target, Resource Save, Print All Order, Sides Duplex

Understanding printer menus		184
	Use	To
	Download Target	Set the storage location for downloads.
	RAM	Notes:
	Flash
		• RAM is the factory default setting. Storing downloads in the RAM is
	Disk
		temporary.
		• Storing downloads in flash memory or on a printer hard disk places them in
		permanent storage. Downloads remain in flash memory or on the printer
		hard disk even when the printer is turned off.
		• This menu item appears only when a flash drive or a formatted, working
		printer hard disk is installed.
	Resource Save	Specify how the printer handles temporary downloads, such as fonts and macros
	On	stored in the RAM, when the printer receives a job that requires more memory than
	Off	is available.
		Notes:
		• Off is the factory default setting. This sets the printer to retain the downloads
		only until memory is needed. Downloads are deleted in order to process print
		jobs.
		• On retains the downloads during language changes and printer resets. If the
		printer runs out of memory, then Memory Full [38] appears, and
		downloads are not deleted.
	Print All Order	Specify the order in which held and confidential jobs are printed when Print All is
	Alphabetical	selected.
	Oldest First	Note: Alphabetical is the factory default setting. Print jobs always appear in
	Newest First	alphabetical order on the printer control panel.
Finishing menu
	Use	To
	Sides (Duplex)	Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
	1 sided	Notes:
	2 sided
		• “1 sided” is the factory default setting.
		• You can set two‑sided printing from the printer software.
		For Windows users:
		Click File > Print, and then click Properties, Preferences, Options, or Setup.
		For Macintosh users:
		Choose File > Print, and then adjust the settings from the Print dialog and pop‑up
		menus.
	Duplex Binding	Define binding for duplexed pages in relation to page orientation.
	Long Edge	Notes:

Short Edge

•Long Edge is the factory default setting. This assumes binding along the long edge of the page (left edge for portrait and top edge for landscape).

•Short Edge assumes binding along the short edge of the page (top edge for portrait and left edge for landscape).