Lexmark 436 Creating a copy shortcut using the printer control panel, Customizing copy settings

Copying 74

3Navigate to:

Copy to > select the tray that contains transparencies > Copy It

If there are no trays that support transparencies, then navigate to: Manual Feeder > select the size of the transparencies > Transparency

4Load transparencies into the multipurpose feeder, and then touch Copy It.

Copying on letterhead

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2From the home screen, navigate to:

Copy > Copy from > select the size of the original document

3Touch Copy to > Manual Feeder.

4Place the letterhead faceup, top edge first into the multipurpose feeder.

5Select the size of the letterhead, and then touch Letterhead > Copy It.

Creating a copy shortcut using the printer control panel

1From the home screen, touch Copy.

2Adjust the copy settings, and then touch Save As Shortcut.

Note: If you change the settings after the copy shortcut has been created, then the settings are not saved.

3Type a unique name for the shortcut, and then touch .

4Verify that the shortcut name is correct, and then touch OK.

If the shortcut name is incorrect, then touch Cancel, and then reenter the information.

Notes:

•The shortcut name appears in the Copy Shortcuts icon on the printer home screen.

•You can use the shortcut when copying another document using the same settings.

Customizing copy settings

Copying to a different size

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.