Lexmark 436 manual Color Dropout, Contrast, Mirror Image, Negative Image, Shadow Detail, Sharpness

Understanding printer menus		177
	Use	To
	Color Dropout	Specify which color to drop during scanning, and how much to increase or decrease
	Color Dropout	the dropout.
	None	Notes:
	Red	• None is the factory default setting for Color Dropout.
	Green
		• 128 is the factory default setting for each color threshold.
	Blue
	Default Red Threshold
	0–255
	Default Green Threshold
	0–255
	Default Blue Threshold
	0–255
	Contrast	Specify the contrast of the output.
	0–5	Note: “Best for content” is the factory default setting.
	Best for content
	Mirror Image	Create a mirror image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible on a scanned image.
	‑4 to 4	Note: 0 is the factory default setting.
	Scan edge to edge	Allow edge-to-edge scanning of the original document.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness of a scanned image
	1–5	Note: 3 is the factory default setting.
	Temperature	Enable the user to specify “warm” or “cool” outputs.
	‑4 to 4	Notes:
		• 0 is the factory default setting.
		• "Cool” values generate a bluer output than the default while “warm” values
		generate a redder output than the default.