Lexmark 436 manual Adjusting toner darkness, Using Max Speed and Max Yield

Printing 65

> Settings > Print Settings > Quality Menu > Print Mode > Black Only >

Adjusting toner darkness

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Print Settings > Quality Menu > Toner Darkness.

3Adjust the setting, and then click Submit.

Using the printer control panel

1From the home screen, navigate to:

> Settings > Print Settings > Quality Menu > Toner Darkness

2Adjust the setting, and then touch .

Using Max Speed and Max Yield

Max Speed and Max Yield let you choose between a faster print speed or a higher toner yield. Max Yield is the factory default setting.

•Max Speed—This lets you print in either black or color depending on what is set in the printer driver. The printer prints in color unless Black Only is selected in the printer driver.

•Max Yield—This lets you switch from black to color based on the color content found on each page. Frequent color mode switching can result to slower printing if the content of pages is mixed.

Using the Embedded Web Server

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Settings > Print Settings > Setup Menu.

3From the Printer Usage list, select Max Speed or Max Yield.

4Click Submit.