Lexmark 436 manual Sending a fax, Setting the date and time, Click Security Set Date and Time

Faxing 105

4In the Fax Number field, enter the printer fax number.

5Click Submit.

Setting the date and time

You can set the date and time so that they are printed on every fax you send.

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Security > Set Date and Time.

3In the Manually Set Date & Time field, enter the current date and time.

4Click Submit.

Note: It is recommended to use the network time.

Configuring the printer to observe daylight saving time

The printer can be set to automatically adjust for daylight saving time:

1Open a Web browser, and then type the printer IP address in the address field.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2Click Security > Set Date and Time.

3Select the Automatically Observe DST check box, and then enter the DST start and end dates in the Custom Time Zone Setup section.

4Click Submit.

Sending a fax

Sending a fax using the printer control panel

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.