Lexmark 436 manual Understanding printer menus 176, FTP bit Depth, File Name

Understanding printer menus		176
	Use	To
	Use Multi‑Page TIFF	Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a
	On	multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages,
	Off	or multiple TIFF files are created with one file for each page of the job.
		Notes:
		• On is the factory default setting.
		• This menu item applies to all scan functions.
	Transmission Log	Specify whether the transmission log prints.
	Print log	Note: “Print log” is the factory default setting.
	Do not print log
	Print only for error
	Log Paper Source	Specify a paper source when printing FTP logs.
	Tray [x]	Note: Tray 1 is the factory default setting.
	Manual Feeder
	FTP bit Depth	Enable the Text/Photo mode to have smaller file sizes by using 1‑bit images.
	1 bit	Note: “8 bit” is the factory default setting.
	8 bit
	File Name	Type a base file name.
		Note: You can type up to 53 characters.
	Custom Job Scanning	Copy a document that contains mixed paper sizes into a single scan job.
	On	Notes:
	Off
		• Off is the factory default setting.
		• This menu item appears only when a formatted, working printer hard disk is
		installed.
	Scan Preview	Specify whether a preview will appear on the display for scan jobs.
	On	Notes:
	Off
		• Off is the factory default setting.
		• This menu item appears only when a formatted, working printer hard disk is
		installed.
	Allow Save as Shortcut	Enable shortcut creation for FTP addresses.
	On	Note: On is the factory default setting.
	Off
	Background Removal	Adjust the amount of background visible on a copy.
	‑4 to 4	Note: 0 is the factory default setting.
	Color Balance	Enable an equal balance of colors in the output.
	Cyan - Red
	Magenta - Green
	Yellow - Blue