Cisco Systems 8961 manual IPv4 Setup Menu Options

Chapter 7 Configuring Settings on the Cisco Unified IP Phone

IPv4 Setup Menu Options

IPv4 Setup Menu Options

The IPv4 Setup menu is a submenu of the Ethernet Setup menu and of the WLAN Setup menu. To reach the IPv4 menu, select the IPv4 option on the Ethernet Setup menu or on the WLAN Setup menu.

Table 7-3describes the IPv4 Setup menu options.

For information about the keys you can use to edit options, see the “Editing Values” section on page 7-3.

Table 7-3			IPv4 Setup Menu Options
	Option			Description	To Change
	DHCP Enabled			Indicates whether the phone has DHCP enabled or	Scroll to the DHCP Enabled option
				disabled.	and press the No softkey to disable
				When DHCP is enabled, the DHCP server assigns the	DHCP, or press the Yes softkey to
					enable DHCP.
				phone an IPaddress. When DHCP is disabled, the
				administrator must manually assign an IP address to the
				phone.
	IP Address			Internet Protocol (IP) address of the phone.	1.	Set the DHCP Enabled option to
				If you assign an IP address with this option, you must also		No.
				assign a subnet mask and default router. See the Subnet	2.	Scroll to the IP Address option,
				Mask and Default Router options in this table.		press the Select softkey, and then
						enter a new IP Address.
					3.	Press the Apply softkey
	Subnet Mask			Subnet mask used by the phone.	1.	Set the DHCP Enabled option to
						No.
					2.	Scroll to the Subnet Mask
						option, press the Select softkey,
						and then enter a new subnet
						mask.
					3.	Press the Apply softkey.
	Default Router			Default router used by the phone.	1.	Set the DHCP Enabled option to
						No.
					2.	Scroll to the appropriate Default
						Router option, press the Select
						softkey, and then enter a new
						router IP address.
					3.	Press the Apply softkey.
	DNS Server 1			Primary Domain Name System (DNS) server (DNS Server	1.	Set the DHCP Enabled option to
	DNS Server 2			1) and optional backup DNS servers (DNS Server 2–3)		No.
				used by the phone.		Scroll to the appropriate DNS
	DNS Server 3				2.
						Server option, press the Select
						softkey, and then enter a new
						DNS server IP address.
					3.	Press the Apply softkey.
					4.	Repeat Steps 2 and 3 as needed
						to assign backup DNS servers.
		Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
	7-10					OL-20861-01