2.3 Antenna Setup
Part A: Fixed
Suppose that you have selected Fixed Antenna in the Antenna Connection window.
1.Satellite: All selected satellites in the satellite list are displayed in this item.
Press 
keys to select the satellite in
circle. Or press OK key to pop up the drop- down list, then select the desired satellite in the list and press OK key to confirm.
2.LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above.
3.22K, 0/12V, Toneburst, LNB Power: You
can press | keys to select in circle. |
Part B: Moter
Suppose that you have selected Moter Antenna in the Antenna Connection window.
1.LNB Type: Select the proper LNB type.
2.Motor Type: Select between DiSEqC1.2 and USALS. If you select DiSEqC1.2, the
following Local Longitude and Local Latitude items will turn grey.
3.Delete All: Press OK key to pop up the
dialogue "Are you sure to clear set satellite position of this tuner?". Press OK key at the Yes button to clear all the memories about the position of the satellites that has connected to the current turner.
