Fortec FS-4000v2 manual West Save East Press, Limit Setup window, Limit Setup Press

4.Motor Setting: Press OK key to the Motor Setting window.

Satellite: Press keys to select the

satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm.

Transponder: The same operation as the above.

Position No., & Save: The range is from 0 to 63. "0" delegates the original position. You can select the proper value when you has rotated the antenna.

Go to X: Press OK key to pop up the drop-down list, select the proper position

(reference or from 1to 63) to realize the selected position.
West <Save> East: Press	key to turn west, while press	key to turn east.

Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK key at the Yes button to save the current position, or press OK key at the No button to cancel the operation.

Recalculation: Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK key at the Yes button to recalculation.

5.Limit Setup: Press OK key to pop up the

Limit Setup window.
Limit Setup: Press	keys to switch

among Disable Limit, East Limit and West Limit.

Limit Setup: Move cursor to the Limit Setup

button. You can press		key to turn west ,
or press	key to turn east.

Go to Reference: Press OK key to go to reference. If you select Disable Limit in the above Limit Setup item, this button will turn grey.