TL-WR941N/TL-WR941ND

Wireless N Router

1.4.2 The Rear Panel

Figure 1-2 Rear Panel sketch

The following parts are located on the rear panel (View from left to right).

¾Power socket: The Power socket is where you will connect the power adapter. Please use

the power adapter provided with this TL-WR941N/941ND Wireless N Router.

¾LAN (1,2,3,4): These ports (1, 2, 3, 4) connect the router to the local PC(s).

¾WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet.

¾Reset button

There are two ways to reset to the router's factory defaults:

1)Use the Factory Defaults function on System Tools ->Factory Defaults page in the router's Web-based Utility.

2)Use the Factory Default Reset button: Press the Reset button for five seconds and then wait for the router to reboot.

¾Wireless antenna: To receive and transmit the wireless data.

- 5 -

Page 10
Image 10
TP-Link TL-WR941ND manual Rear Panel, ¾ Reset button