TL-WR941N/TL-WR941ND

Wireless N Router

4.5.3 MAC Clone

Choose menu “NetworkMAC Clone”, you can configure the MAC address of the WAN on the screen below, Figure 4-10:

Figure 4-10 MAC Address Clone

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely needed here.

¾WAN MAC Address - This field displays the current MAC address of the WAN port. If your ISP requires you to register the MAC address, please enter the correct MAC address into this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit).

¾Your PC's MAC Address - This field displays the MAC address of the PC that is managing the router. If the MAC address is required, you can click the Clone MAC Address To button and this MAC address will fill in the WAN MAC Address field.

Click Restore Factory MAC to restore the MAC address of WAN port to the factory default value.

Click the Save button to save your settings.

)Note:

Only the PC on your LAN can use the MAC Address Clone function.

4.6Wireless

Figure 4-11 Wireless menu

There are four submenus under the Wireless menu (shown in Figure 4-11):Wireless Settings, Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click

- 26 -

Page 31
Image 31
TP-Link TL-WR941ND manual Wireless, MAC Clone