TL-WR941N/TL-WR941ND

Wireless N Router

4.5Network

Figure 4-4 the Network menu

There are three submenus under the Network menu (shown in Figure 4-4): LAN, WAN and MAC Clone. Click any of them, and you will be able to configure the corresponding function.

4.5.1 LAN

Choose menu “NetworkLAN”, you can configure the IP parameters of the LAN on the screen as below.

Figure 4-5 LAN

¾MAC Address - The physical address of the router, as seen from the LAN. The value can't be changed.

¾IP Address - Enter the IP address of your router or reset it in dotted-decimal notation (factory default: 192.168.1.1).

¾Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask.

)Note:

a.If you change the IP Address of LAN, you must use the new IP Address to login the router.

b.If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same timewhile the Virtual Server and DMZ Host will not take effect until they are re-configured.

4.5.2 WAN

Choose menu “NetworkWAN”, you can configure the IP parameters of the WAN on the screen below.

- 21 -

Page 26
Image 26
TP-Link TL-WR941ND manual Network, 1 LAN, 2 WAN